Brochure

PRODUCT RANGE - DIRTMAG
®
3D CROSS SECTION
03505-15NA
MAX. WORKING PRESSURE 45 psi (3 bar)
WORKING TEMPERATURE RANGE 32 — 195 °F (0–90°C)
SUITABLE FLUIDS water, glycol solutions
MAX. PERCENTAGE OF GLYCOL: 30%
DOSING FLUID CAPACITY 12 fl oz (0.35 l)
PARTICLE SEPARATION CAPACITY up to 5 μm (0.2 mil)
FERROUS IMPURITIES REMOVAL EFFICIENCY up to 100%
PERFORMANCE
CODE CONNECTION
NA545305
¾” NPT
NA545395
¾” sweat
NA545306
1” NPT
NA545396
1”sweat
NA545355
¾” union NPT
with isolation
values
NA545356
1” union NPT
with isolation
values
NA545365
¾” press
Calef North America, Inc. · 3883 W. Milwaukee Road · Milwaukee, WI 53208
Tel. [phone] · Fax [phone]
sales@calef .com · www.calef .com
© Copyright 2015 Calef North America, Inc.
WE RESERVE THE RIGHT TO CHANGE OUR PRODUCTS AND THEIR RELEVANT
TECHNICAL DATA, CONTAINED IN THIS PUBLICATION, AT ANY TIME AND WITHOUT
PRIOR NOTICE.
CONNECTIONS
DIRT SEPARATION
FERROUS IMPURITIES REMOVAL
The DIRTMAG
®
low-velocity zone dirt separator with
magnet efficiently removes particles to a very small size
with very low pressure head losses compared to typical
Y-strainers, reducing pumping demands.
The large dirt collection chamber requires infrequent
cleaning, which is quick and efficient with an easy to
use drain valve. Ferrous impurities, including magnetite,
are trapped inside the collection chamber by a strong
magnetic field created by a powerful removable exter-
nal rare-earth magnet around the body below the flow
valve for fast and effective capture, up to 100% elimina-
tion efficiency, and discharge.
DIRT DISCHARGE
AIR VENT
APPLICATION DIAGRAM
REFERENCE DOCUMENTATION: TECHNICAL BROCHURE 01240