Brochure

DIRTMAG
®
NA5453 Series
Dirt separator with magnet in engineered polymer. NPT male threaded union and sweat union connections ¾” and 1”, press
union connections ¾”. Adjustable for either vertical or horizontal piping. Brass drain valve with hose connection. Brass tee
pipe fitting. Engineered polymer PA66G30 body with an external removable magnetic ring, neodymium rare-earth. Engineered
polymer PA66G30 cover. HDPE internal element removable for cleaning. EPDM hydraulic seals. Suitable fluids: water or 30%
maximum glycol solution. Maximum working pressure 45 psi (3 bar). Working temperature range 32 to 195°F (0 to 90°C).
Particle separation capacity: to 5μm (0.2 mil). Ferrous impurities separation efficiency: up to 100% removal. Provide with
optional integral inlet and outlet shut off ball valves for ¾” and 1” with NPT female threaded connections.
SPECIFICATION SUMMARY
Shut-off valve
Ball valve
Check Valve
Temperature gauge
Differential
by-pass valve
Zone valve
Pump
FlowCal
TM
Hydraulic separator
Temperature probe
Safety thermostat
Regulator
Expansion vessel
3-way cock
Pressure switch
Test pocket
Gas filter
Gas regulator
Y-strainer
Fuel shut-off valve
Discal
TM
Anti-vibration joint
Pocket
Safety relief valve
Backflow preventer
Automatic
charging unit
Application diagram
Flow switch
Low pressure switch
Calef North America, Inc.
3883 W. Milwaukee Rd
Milwaukee, WI 53208
Tel: [phone] · Fax: [phone]
sales@calef.com · www.calef.com/en-us
© Copyright 2015 Calef
We reserve the right to change our products and their relevant technical data, contained in this publication, at any time and without prior notice.