Brochure

®
dirt separator with magnet,
adjustable for vertical or horizontal pipe
CALEFFI
Product range
NA54530 series DIRTMAG
®
dirt separator with magnet for horizontal and vertical pipes................................connections ¾” & 1” NPT male union
NA54535 series DIRTMAG
®
dirt separator with magnet for horizontal and vertical pipes with isolation shut off valves.............connections ¾” & 1” NPT female
NA54539 series DIRTMAG
®
dirt separator with magnet for horizontal and vertical pipes......................................connections ¾” & 1” sweat union
NA54536 series DIRTMAG
®
dirt separator with magnet for horizontal and vertical pipes..............................................connections ¾” press union
01240/15 NA
ISO 9001 No. 0003
ACCREDITED
ISO 9001 FM 21654
Technical specifi cations
Materials
Body: glass reinforced nylon PA66G30
Dirt separator cover: glass reinforced nylon PA66G30
Top dosing point port plug: brass EN 12164 CW614N
Drain screw: brass EN 12164 CW614N
Tee pipe fi tting: brass EN 1982 CB 753S
Locking nut for tee pipe fi tting: brass EN 12420 CW617N
Internal element: HDPE
Hydraulic seals: EPDM
Drain valve: brass EN 12165 CW617N
Performance
Suitable Fluids: water, glycol solutions
Max. percentage of glycol: 30%
Max. working pressure: 45 psi (3 bar)
Working temperature range: 32–195°F (0-90°C)
Magnets: neodymium rare earth
Particle separation capacity: to 5μm (0.2 mil)
Ferrous impurities separation effi ciency: up to 100% removal
Dosing capacity: 12 fl uid oz
Connections
Main connections: 3/4” and 1” NPT male union
3/4” and 1” NPT female
3/4” and 1” sweat union
3/4” press union
Lay length (press connection): 5 7/16”
Dimensions
1 5/8"
Code A B C D E Weight
NA545305 ¾” M NPT 3 7/16” 6 7/8” 7” 3 7/16” 4.5 lbs.
NA545395 ¾” sweat 3
7/16” 6 5/8” 7” 3 5/16” 4.5 lbs.
NA545365 ¾”press 3
7/16” 7 1/4” 7” 3 5/8” 4.5 lbs.
NA545306 1” M NPT 3
7/16” 7 1/2” 7” 3 3/4” 4.5 lbs.
NA545396 1” sweat 3
7/16” 7 5/8” 7” 3 13/16” 4.5 lbs.
NA545355 ¾” F NPT 3
7/16” 8 1/2” 7” 4 1/4” 5.5 lbs.
NA545356 1” F NPT 3
7/16” 8 3/4” 7” 4 3/8” 5.5 lbs.
NA5453 series
Replaces 01240/14 NA
Function
In heating and chilled water systems, the circulation of water containing
impurities may result in rapid wear and damage to components such
as pumps and control valves. It also causes blockages in heat
exchangers, heating elements and pipes, resulting in lower thermal
effi ciency within the system.
The dirt separator separates off these dirt particles, circulating
within the closed circuit system. These particles are collected in a
large chamber, requiring infrequent cleaning, which requires simply
removing the magnet ring and opening the large drain valve while
the system is running. This device is capable of effi ciently removing
particles to a very small size, with very low pressure head loss.
The DIRTMAG
®
magnetic dirt separator removes both ferrous and
non-ferrous impurities continuously, featuring a powerful removable
external magnet around the body that removes up to 100% of the
ferrous impurities, including magnetite, that can form in a hydronic
system. The DIRTMAG
®
has 2½ times the removal performance of
a standard dirt separator. The body of the NA5453 series separator
is made of glass reinforced nylon specifi cally designed for use in
heating and cooling systems. It also is especially versatile as it can be
installed on either horizontal or vertical piping with the rotating brass
base mount.
The NA5453 series is available with conventional NPT and sweat
union connections and for size 3/4”, the Presscon™ copper tail-piece
with union nut that makes installation and maintenance fast, easy and
effi cient. Special slots in the EPDM O-ring allows fl uid to leak during
system testing if unpressed and provide a perfect leak proof seal
when completely pressed. Also, models are available with isolation
inlet and outlet shutoff valves, which can be used as a dosing point to
inject chemical additives into the hydronic circuit.