Brochure

97
10
A
VBUS DATA INTERFACE
Code Description Pk Lbs USD
NA15008 Smart display 1 2.0 650.00
Code Description Pk Lbs USD
NA15009 Alarm module 1 0.2 220.00
Code Description Pk Lbs USD
NA15020 USB to VBus data interface 1 0.3 230.00
Code Description Pk Lbs USD
NA15021 PWM or 0—10 vdc to VBus interface 1 0.3 260.00
Code Description Pk Lbs USD
NA15022 LAN socket to VBus data interface 1 0.3 300.00
SD3
Smart display SD3 connected to VBus
data interface is used for displaying
data from iSolar™ controller; collector
temperature, storage temperature and total
energy heat produced. An additional power
supply is not required. Bright LED displays.
Power supply: via VBus.
Mounting: wall.
Alarm module AM1 to VBus data interface
is used to signal sensor failures to a red
fl ash-LED optical signal and a dry contact
output relay, which can be connected to an
additional signaling device or to a building
management system. Sensor failure signal
by LED. Supply and control via VBus.
Ambient temperature: -13—158ºF.
Display: 1 LED.
Mounting: wall.
Output: 1 dry contact relay.
Alarm switching capacity: 1 A, 24 V AC/DC.
AM1
USB
USB to VBus data interface to connect
iSolar™ controller to PC for transmission of
system data for processing, visualizing and
archiving.
Full version of Service Center software
included on CD-ROM. USB 2.0 full speed
with mini-USB port and cable.
Power supply: via VBus.
PWM
PWM or 0—10 VDC to VBus data interface
is used for speed control of a pump.
Information from the iSolar™ controller
is converted into a PWM or 0—10 VDC
output control signal which is connected to
input control signal of a pump.
Display: LED display.
Wall power: 100-240 VAC / 50-60 Hz.
Adapter input voltage: 12 VDC.
LAN
LAN socket to VBus data interface to
connect controller to PC network or
router for transmission of system data for
processing, visualizing and archiving over
a local network. Full version of Service
Center software included.
Wall power: 100-240 VAC / 50-60 Hz.
Adapter input voltage: 12 VDC.
Code Description Pk Lbs USD
NA15006 Lightning protector 1 0.2 70.00
The lightning protector SP10 device is
used to protect the collector temperature
sensor and controller against external over-
voltages such as those caused by lighting
strikes.
SP10
Code Description Pk Lbs USD
NA605010 24 VAC wall transformer 1 1.0 44.40
Wall transformer.
Input voltage: 120 V AC
Output voltage: 24 V AC.
Power output: 40 VA.
Agency approval: cULus
WALL