Brochure

13
53
1216
53
+.6+$ #2" +#/1.3$"3(.-3'$1,.23 3(",(7(-&5 +5$2
%KNVQ@SDTRD
The Caleffi 5213 series is a thermostatic mixing valve suitable for ONHMSNE
TRD@OOKHB@SHNM. For this reason, the fl ow rate through the valve is the same
as that of the fi nal outlet, e.g. mixer or tap for washbasin, shower or bath.
In order to ensure the set temperature, the thermostatic mixing valve must
have a minimum fl ow rate of .5 gpm (1 l/min).
The system must be sized taking into account the local requirements with
regard to the nominal fl ow rate of each outlet.
3DLODQ@STQD@CITRSLDMS
Temperature setting can be adjusted by removing the cap from the valve
body and reversing the cap onto the temperature adjustment spindle.
In accordance with the anti-scald requirements, mixed water at the outlet of
the sanitary fi xtures is suggested to not exceed the following values:
120°F (49°C) for domestic or normal buildings
110°F (43.3°C) for hospitals or special buildings
100°F (38°C) for children
Temperature setting can then be locked at the desired value using the
locking nut.
Fitting temperature adjustment cap
View of temperature adjustment Temperature adjustment cap in place
Locking adjustment spindle with
locking nut
Adjustable thermostatic and pressure
balanced mixing valve for point of use
where the user must be protected from the
danger of scalding caused by hot water
with locking set point. Complete with check
valves on both hot and cold inlets.
Low-lead brass body.
Max. working pressure: 150 psi.
Max. inlet temperature: 185ºF.
Adjustable range: 85—120ºF.
Temperature control: ±3°F.
Min. fl ow for optimum performance: 0.5 gpm.
Certifi ed to: cUPC listed to ASSE 1070/
CSA B125.3 for single and multiple function
applications.
Reduction of Lead in Drinking Water Act
Compliant: (0.25% Max. weighted average
lead content. Reduction of Lead in Drinking
Water Act Certifi ed by IAPMO R&T
5213 Sweat
Scald Protection
Point-of-Use
tech. broch. 01092
Code Description Cv Pk Lbs USD
521349A ½" sweat 2 10 20 246.90
521359A ¾" sweat 2 10 20 258.10
521369A 1" sweat 2 10 20 308.40
Adjustable thermostatic and pressure
balanced mixing valve for point of use
where the user must be protected from the
danger of scalding caused by hot water
with locking set point. Complete with check
valves on both hot and cold inlets.
Low-lead brass body.
Max. working pressure: 150 psi.
Max. inlet temperature: 185ºF.
Adjustable range: 85—120ºF.
Temperature control: ±3°F.
Min. fl ow for optimum performance: 0.5 gpm.
Certifi ed to: cUPC listed to ASSE 1070/
CSA B125.3 for single and multiple function
applications.
Reduction of Lead in Drinking Water Act
Compliant: (0.25% Max. weighted average
lead content. Reduction of Lead in Drinking
Water Act Certifi ed by IAPMO R&T
5213 NPT
Scald Protection
Point-of-Use
tech. broch. 01092
Code Description Cv Pk Lbs USD
521342A ½" NPT male 2 10 20 258.10
521352A ¾" NPT male 2 10 20 269.30
521362A 1" NPT male 2 10 20 319.80
/NHMSNETRDHMRS@KK@SHNM
NEW
NEW
NEW
NEW