Brochure
2
15
Dirt separator.
Epoxy resin coated steel body.
Complete with drain valve (code NA39753).
ANSI 150 fl ange connections.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Particle separation capacity: to 5 μm (0.2 mil).
Dirt separator.
Epoxy resin coated steel body.
Complete with drain valve (code NA39753).
ANSI 150 fl ange connections.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
ASME and CRN Registered.
Particle separation capacity: to 5 μm (0.2 mil).
tech. broch. 01137
tech. broch. 01137
Code Description Pk Lbs USD
546550A 2" ANSI fl ange 1 29 2,226.00
546560A 2½" ANSI fl ange 1 32 2,420.00
546580A 3" ANSI fl ange 1 51 3,245.00
546510A 4" ANSI fl ange 1 54 3,596.00
Code Description Pk Lbs USD
NA546550A 2" ANSI fl ange ASME & CRN 1 38 3,659.00
NA546560A 2½" ANSI fl ange ASME & CRN 1 38 3,728.00
NA546580A 3" ANSI fl ange ASME & CRN 1 55 4,170.00
NA546510A 4" ANSI fl ange ASME & CRN 1 55 4,365.00
NA546512A 5" ANSI fl ange ASME & CRN 1 138 6,300.00
NA546515A 6" ANSI fl ange ASME & CRN 1 148 8,085.00
The recommended fl uid velocity at the unit connections for the steel
DIRTCAL
®
is ~ 4 feet per second. The following table shows the fl ow rates
to comply with this condition.
5465 NA5465
Size 2" 2.5" 3" 4" 5" 6"
GPM 37 63 96 149 259 380
Cv 88 176 211 328 520 842
FLOW CAPACITY AT 4 fps
Drain ball valve.
Fits DIRTCAL
®
5465 and NA5465 series.
Brass body.
Tee handle.
Max. working pressure: 150 psi.
Max. working temperature: 365°F.
Code Description Cv Pk Lbs USD
NA39753 1" NPT female T handle 50 1 0.7 51.90
ASME/CRN
DIRT SEPARATORS FOR COMMERCIAL APPLICATIONS
, &-$3("#(132$/ 1 3.12
Code Description Pk Lbs USD
NA545305 ¾" union NPT 1 4.5 296.20
NA545365 ¾" press 1 4.5 305.60
NA545395 ¾" union sweat 1 4.5 294.00
NA545306 1" union NPT 1 4.5 341.00
NA545396 1" union sweat 1 4.5 324.80
NA5453
tech. broch. 01240
Dirt separator with magnet.
Brass mounting housing.
Composite PA66G30 body.
Max. working pressure: 45 psi.
Working temperature range: 32—195°F.
The special coupling between the locking nut and the mounting base allows
the DIRTMAG
®
dirt separator to be rotated for installation to either vertical or
horizontal pipes, while maintaining the same operating performance.
The dirt separator with magnet combines the
action of the internal element and magnet. The
impurities in the water strike the internal element
and are separated, dropping into the bottom of
the body where they are collected.
Ferrous impurities are also trapped inside the
dirt separator body by two strong magnets
inserted into removable outer ring collar.
The
collected impurities are discharged by removing
the external ring magnet and opening the drain
cock, this procedure can even be performed
while the system is in operation.