Install Instructions

Technical specifications
Valve body
Materials: - Body: DZR low-lead brass
- Ball: sizes ¾” - 2”: low-lead brass, chrome-plated
sizes 2½” & 3”: AISI 316 stainless steel
- Slip-on flanges for sizes 2½” & 3”: galvanized carbon steel
- O-ring seals: peroxide-cured EPDM
- Ball seats: PTFE
Max. body pressure rating (static): 230 psi (16 bar)
Max working pressure (dynamic): 150 psi (10 bar)
Max. inlet temperature: 212°F (100°C)
Temperature gauge scale: 32 - 176°F (0 - 80°C)
Suitable fluids: water
Max. water hardness: 10 grains
Main connections: -NPT male, sweat and press union ¾”, 1", 1¼", 1½" and 2"
-ANSI B16.5 150 CLASS RF 2½” & 3”
Actuator, 3-wire floating fail-in-place
Electric supply: 24 VAC - 50/60 Hz
Power consumption: 6 VA
Protection cover: self-extinguishing VO
Protection class: IP 65 (NEMA 4/4X)
Ambient temperature range: 14 - 130°F (-10 - 55°C)
Electric supply cable length: 31½” (0.8 m)
Max. distance for control signal wire:
500 ft (150 m) cable 2 conductor x AWG 18
800 ft (250 m) cable 2 conductor x AWG 16
4
WARNING: This product can expose you to chemicals including lead, which is known
to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
AVERTISSEMENT: Ce produit peut vous exposer à des produits chimiques comme
le plomb, qui est connu dans l’État de Californie pour causer le cancer, dommages à
la naissance ou autre. Pour plus d’informations rendez-vous www.P65Warnings.ca.gov.
Product range
6000 series Electronic mixing valve with programmable thermal disinfection, 24 VAC with union
connections, NPT male, sweat and press............................................sizes ¾”, 1”, 1¼”, 1½” & 2”
6000 series Electronic mixing valve with programmable thermal disinfection, 24 VAC with ANSI 150
RF flanged connections............................................................................................sizes 2½” & 3”
NA10520 Modbus-to-BACnet gateway