Owner's manual

Alarm description table

Alarm indicator Description

AL1 Flow probe faulty

AL2 Return probe faulty

AL3 Disinfection failed

AL4 Thermal Shock in progress

AL5 Mains electric supply failure

AL6 Appliance reset

AL7 Battery faulty

Depending on the type of alarm, certain actions are undertaken,

relay statuses modified and information shown on the LED displays,

LCD display and LEDs on the front panel.

For the operating details please refer to the installation and

commissioning manual.

Alarm management

In order to simplify the solution of any functional problems after installation and commissioning, the regulator is configured so as to signal any

operating trouble with alarms and to undertake the appropriate action.

In this case the cause of the alarm is shown on the LCD display.

If the alarm does not inhibit all the functions, the alarm screen will alternate with the appliance status screen.

tuesday 13/02/2006

AlARM

mixing probe

tuesday 13/02/2006 tuesday 13/02/2006

ALARM

recirc. probe

ALARM

disinfection

incomplet

tuesday 13/02/2006

battery

alarm