Brochure

1213121
7
88
Portable water treatment filling unit, demineralizes
site water through a mixed bed resin ion exchange
with TDS indicator.
Complete including resin bags.
Composite PPHAGF50 body.
Max. inlet pressure: 120 psi.
Max. working temperature: 100°F.
Max. fill rate NA570912: 6 gpm.
Max. fill rate NA579024: 12 gpm.
TDS of water after treatment: < 30 ppm
Connections: ¾” GHT
NA570
HYDROFILL
™
WATER TREATMENT FILLING UNITS
Replenishment water treatment filling unit,
demineralizes site water through a color
changing (indicates when to change)
demineralizing cartridge.
Max. inlet pressure: 125 psi.
Max. working temperature: 100°F.
Max. flow: 1 gpm.
TDS of water after treatment: < 30 ppm
NA573
Code Description Lbs USD
NA570912 Two resin filter bag unit 44
3,182.00
NA570924 Four resin filter bag unit with cart 98 6,047.00
Code Description Lbs USD
NA573022* ½" FNPT 7.4
573.00
NA573100** Replacement filter housing assembly 3.4 260.00
NA573102 Replacement color-changing filter 1.0 133.00
Resin bags for HYDROFILL
™
in reusable
plastic pail.
Code Description Lbs USD
NA570971 Two resin bags for NA570912 22 694.00
NA570974 Four resin bags for NA570924 43 1,387.00
Multi-parameter TDS, pH & temperature
tester kit complete with carrying case plus
pH and conductivity calibration packets.
Range TDS: 0 —999.9 ppm.
Range pH: 0 — 14.
Range temp: 32 — 122°F.
NA575
Code Description Lbs USD
NA575002 TDS, pH & temperature tester kit 3.0
790.00
The large yellow lever enables quick and
easy opening of the tank. The lever includes
a pressure release valve. In one motion as the
lid is turned to the full open position, the tank
depressurizes and opens to the full diameter
of the tank.
Pre-packed resin bags save time and
simplify resin change process. No more time-
consuming, inconvenient filling up of narrow
tanks and no more spilled, wasted resin.
Resin change process is simple as removing
the used bags and inserting new ones. Each
bag is made from a water permeable material
and contains a pre-proportioned amount of
high capacity premium grade virgin mixed
bed resin.
Innovative flow distribution screen design
evenly distributes the inlet water through the
entire column of resin. Produces up to 30%
more treated water from a single resin refill
compared to other types of demineralization
tanks. Reduced operational cost through
less frequent resin replacement. Less waste,
less time spent on changing resin.
Highly accurate built-in TDS meter 0 - 999 ppm
with resolution of 1 ppm due to its advanced
microprocessor technology. Auto-Off function
conserves battery power. The unit shuts
off automatically after 10 minutes of non-
use. Replaceable battery with a life of
approximately 1000 hours of continuous use.
Construction details
*Complete including back flow preventer, isolation valves, filter housing with resin cartridge and AutoFill
™
.
**Filter housing only. Includes color changing demineralizing cartridge.
Code Description Lbs USD
NA57094 Replacement twist-on lid 3 943.00
Replacement twist-on lid.
Includes new TDS monitor.
NEW
NEW
Replacement parts
Code Description Lbs USD
NA57092 Replacement internal inlet/outlet screens 1.5 86.30
NA57093 Replacement o-ring seal kit 0.1 139.00
NEW
NEW