Brochure

73
6
B
Code Description Lbs USD
F19346 Replacement by-pass valve stem* 0.1
58.40
*with operating ring
Balancing valve with flow meter.
Direct reading of flow rate.
No sight gauge clouding or scaling.
Brass valve body and flow meter.
Rotatable valve for flow rate adjustment.
With insulation.
Max. working pressure: 150 psi.
Temperature range: 14—230°F.
Max. percentage of glycol: 50%.
132
QuickSetter
™
Flow rate adjustment
The flow rate is adjusted as follows:
Complete opening and closing of the valve
A. With the aid of the flow rate
indicator (1), mark the desired
flow rate.
B. Use the operating ring (2)
to open the by-pass valve
slowly. This allows fluid to flow
through the flow meter (3). The
bypass valve is automatically
closed under normal operating
conditions.
Full opening of the valve Full closing of the valve
C. While holding the bypass valve open, use a wrench to turn the valve
control stem (4) to adjust the flow rate slowly. The resulting flow rate
is indicated by the metal ball (5) that slides up and down inside a
transparent channel (6) marked by a graduated scale in gpm.
D. Once the flow rate is properly adjusted, release the operating ring (2)
of the by-pass valve. The valve will automatically return to the closed
position by means of an internal spring.
E. A replacement by-pass valve stem (7) with operating ring is available in
event it is damaged and inoperable. Order code F19346.
STATIC BALANCING VALVES WITH FLOWMETER FOR HYDRONICS
Code Description Flow scale (gpm) Lbs USD
132432A ½" FNPT 0.5—1.75 2.0 289.00
132552A ¾" FNPT 2.0—7.0 1.8 311.00
132662A 1" FNPT 3.0—10.0 2.4 363.00
132772A 1¼" FNPT 5.0—19.0 2.8 482.00
132882A 1½" FNPT 8.0—32.0 3.4 571.00
132992A 2" FNPT 12.0—50.0 4.4 700.00
Balancing valve with flow meter.
Direct reading of flow rate.
ANSI 125 flanged cast iron body.
Brass flow meter.
Max. working pressure: 150 psi.
Temperature range: 14—230°F.
Max. percentage of glycol: 50%.
132
QuickSetter
™
Code Description Flow scale (gpm) Lbs USD
132060A 2½" ANSI flange 30—105 35
1,728.00
132080A 3" ANSI flange 38—148 62 2,305.00
132100A 4" ANSI flange 55—210 67 3,519.00
Code Description Lbs USD
F0000940 0.5 to 1.75 GPM 0.2 160.00
F0000941 2.0 to 7.0 GPM 0.2 160.00
F0000942 3.0 to 10 GPM 0.2 160.00
F0000943 5.0 to 19 GPM 0.2 168.00
F0000944 8.0 to 32 GPM 0.2 168.00
F0000945 12 to 50 GPM 0.2 168.00
F0000946 30 to 105 GPM 0.2 177.00
F0000947 38 to 148 GPM 0.2 177.00
F0000948 55 to 210 GPM 0.2 177.00
Replacement flow meter.
NEW
NEW