Brochure

57
1213
5
Cap to plug unused manifold outlets on
592, 663 and 668S1 series.
386
680 series fittings are compatible with any
ASTM F876 single layer PEX.
Max. working pressure: 150 psi.
Working temperature range for ASTM
F876 PEX piping: 40—180°F.
680
Universal
PEX fittings
682 series fittings are compatible with any
ASTM F1281 multilayer PEX-AL-PEX pipe.
Max. working pressure: 150 psi.
Working temperature range for ASTM
F1281 PEX-AL-PEX piping: 40—200°F with
tubing rated 200°F.
682
Universal
PEX-AL-PEX fittings
Sweat connection fitting fits ½" copper.
Max. working pressure: 150 psi.
Working temperature range: 41—250ºF.
Chrome plated nut.
Does not work with 668S1 and 172 series.
NA102
FITTINGS FOR DISTRIBUTION MANIFOLDS AND MIXING STATIONS
(680504A shown)
(682530A shown)
NPT connection fitting.
Max. working pressure: 150 psi.
Working temperature range: 41—250ºF.
Chrome plated nut.
Does not work with 668S1 and 172 series.
NA103
Double nipple for coupling PEX fittings.
Low pressure losses
The internal profile of the adapter (1) is shaped
to obtain a Venturi effect when the fluid
passes through, reducing pressure losses
by 20%, compared to a similar diameter.
Insulation ring
The fitting is equipped with a rubber insulation
element (2) to prevent contact between the
aluminium in PEX-AL-PEX pipe and the brass
fitting, thus preventing galvanic corrosion
generated by the two different metals.
Dual O-ring seal
The adapter is equipped with two O-ring
seals (3) and (4) in EPDM to prevent leaks even when operating at high
pressure.
1
2
3
4
Construction details
There is a large variety of PEX and PEX-AL-PEX pipes available with a wide
range of permissible tolerances. This fitting is designed to adapt to several
pipe diameter tolerances. This innovative solution for mechanical fittings
has been constructed so that the same fitting can be used for pipes with
different external diameter tolerances and differences on internal diameters
tolerances while maintaining the nominal dimensions.
Resistance to pull out
This fitting offers a high degree of resistance to pull out of pipe. Its special
clamping system makes it suitable for every application and ensures a
leak tight fit.
Wrench for tightening PEX fitting
to manifolds.
Code Description Lbs USD
NA10262 ½" sweat 0.2 15.40
Code Description Lbs USD
NA10313 ½" NPT male 0.2 16.60
Code Description Lbs USD
387100 26 mm x 30 mm 1.5 65.80
Code Description Lbs USD
386500 ¾" straight thread 0.2 13.80
Code Description Lbs USD
942550 ¾" x ¾" thread 0.1 17.20
Code Description Compression ring Lbs USD
680507
5
/
16
" nominal PEX Blue 0.2 13.80
680503A
3
/
8
" nominal PEX Black 0.2 13.80
680504A
½" nominal PEX
Blue 0.2 13.80
680555A
5
/
8
" nominal PEX Black 0.2 13.80
680505A ¾" nominal PEX Brass 0.2 13.80
Code Description Lbs USD
682530A
3
/
8
" nominal PEX-AL-PEX 0.2 14.20
682540A
½" nominal PEX-AL-PEX
0.2 14.20
682545A
5
/
8
" nominal PEX-AL-PEX 0.2 15.30
682550A
¾" nominal PEX-AL-PEX
0.2 27.00