Brochure

2
30
Code Description Lbs USD
546328A
1" sweat
4.2 342.00
546306A 1" FNPT 4.2 359.00
546366A 1" press 4.5 390.00
546335A 1¼" sweat 4.2 499.00
546307A 1¼" FNPT 5.3 524.00
546367A 1¼" press 5.6 597.00
546341A 1½" sweat 4.9 651.00
546308A 1½" FNPT 6.2 683.00
546368A 1½" press 6.5 781.00
546354A 2" sweat 5.5 794.00
546309A 2" FNPT 6.2 824.00
546369A 2" press 6.5 953.00
Code Description Lbs USD
546205A ¾" FNPT 4.2 270.00
546228A 1" sweat 4.2 284.00
546206A 1" FNPT 4.2 298.00
546266A 1" press 4.5 343.00
546235A 1¼" sweat 4.2 414.00
546207A 1¼" FNPT 5.3 435.00
546267A 1¼" press 5.6 528.00
546241A 1½" sweat 4.9 537.00
546208A 1½" FNPT 6.2 564.00
546254A 2" sweat 5.5 659.00
546209A 2" FNPT 6.2 692.00
Dirt separator with magnet.
Brass body.
½" NPT top thread with plug.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Particle separation capacity: to 5 µm (0.2 mil).
Ferrous impurities separation efficiency: 100%.
5463
The versatile DIRTMAG
®
magnetic dirt separator
removes both magnetic and non-magnetic
particles continuously. In addition to removing
sand and rust impurities with a glass-reinforced
nylon internal element in a low-velocity zone
chamber, the DIRTMAG
®
features a powerful
removable external magnet around the body
below the flow line for fast and effective capture
of ferrous particles. The DIRTMAG
®
has the
magnet positioned externally to maintain low
pressure loss, and removes up to 100% of the
ferrous impurities that can form in a hydronic
system.
The DIRTMAG
®
can be fitted with optional
insulated covers, code CBN5462xx series
purchased separately, to minimize heat loss.
Replacement drain valve fits DIRTCAL
®
5462 series, DIRTMAG
®
5463 series,
DISCALDIRT
®
546 series and
DISCALDIRTMAG
TM
5461 series.
Brass body.
Max. working pressure: 150 psi.
Max. working temperature: 250°F.
The dirt separating action performed by the DIRTCAL
®
is based on using the
internal element with concentric diamond pattern mesh surfaces instead of a
mechanical filter. The element offers little resistance to the medium flow while
ensuring dirt separation. This occurs due to the particles colliding with the
concentric diamond pattern mesh surfaces and then settling to the bottom,
and not by filtration; which, over time, gets continuously clogged. By contrast,
the DIRTCAL
®
low-velocity zone dirt separator requires a pressure drop 25%
or less than that of a comparable Y-strainer depending on mesh size and
amount of filtered debris. It efficiently removes the particles to as small as 5
µm (0.2 mil) with very low head loss. The dirt collection chamber at the bottom
of the DIRTCAL
®
is at the optimal distance from the inlet and outlet connections
to ensure that the collected dirt particles are not affected by the swirling flow
through the mesh element. The dirt can then be removed through the bottom drain
port even with the system running by opening the drain valve. Low head losses and
performance are maintained over time.
DIRT & MAGNETIC DIRT SEPARATORS
Dirt separator.
Brass body.
½" NPT top thread with plug for optional air
vent, code 502243A.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Particle separation capacity: to 5 µm (0.2 mil).
5462
Code Description Lbs USD
538402 FD ½" MNPT x ¾" GHT 0.3 21.50
Insulation shell fits DIRTCAL
®
5462 and
DIRTMAG
®
5463 series.
Labels included for field installation to
externally identify product use.
Code Description Lbs USD
CBN546205
Fits ¾" & 1" DIRTCAL
®
, DIRTMAG
®
0.1 81.40
CBN546207 Fits 1¼" & 1½" DIRTCAL
®
, DIRTMAG
®
0.1 87.30
CBN546209 Fits 2" DIRTCAL
®
, DIRTMAG
®
0.1 95.50
DIRTCAL
®
to DIRTMAG
®
Retrofit kit.
Code Description Lbs USD
F41661A Retrofit kit 2.0 166.00