Brochure

2
28
5461
DISCAL
546
DISCAL
The DISCALDIRT
®
air and dirt separator uses a coalescing element that
consists of an assembly of concentric diamond pattern mesh surfaces.
This element creates the whirling movement required to facilitate the release
of micro-bubbles and their adhesion to these surfaces. The bubbles, fusing
with each other, increase in volume until the bouyancy force overcomes the
adhesion force to the surface. They rise towards the top of the unit and are
released through a float-operated automatic air release valve.
Air & Dirt separator.
Brass body.
Stainless steel float guide pin and linkage.
Glass reinforced nylon internal element.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Particle separation capacity: to 5 µm (0.2 mil).
AIR AND DIRT SEPARATORS
Air & Dirt separator with magnet.
Brass body.
Stainless steel float guide pin and linkage.
Glass reinforced nylon internal element.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Particle separation capacity: to 5 µm (0.2 mil).
Ferrous impurities separation efficiency: 100%.
The DISCALDIRTMAG
™
air and dirt separator with
magnet uses an external magnet ring for separation of
ferrous impurities. The external magnet allows greater
effectiveness in the separation and collection of ferrous
impurities. The impurities are retained in the body of
the dirt separator by the strong magnetic field created
by magnets in its external outer ring. The outer ring is
removable from the body to allow the flushing of sludge,
with the system still running. Since the magnetic ring
is positioned outside the body of the dirt separator,
it does not interfere with the flow through the device.
Code Description Lbs USD
546096A 1" sweat 8.3 513.00
546016A 1" MNPT 8.3 539.00
546097A 1¼" sweat 8.3 612.00
Code Description Lbs USD
546196A 1" sweat 8.5 632.00
546116A 1" MNPT 8.5 659.00
546197A 1¼" sweat 8.5 752.00
Air & Dirt separator.
Epoxy resin coated steel body.
Stainless steel float guide pin and linkage.
Stainless steel mesh internal element.
1" NPT threaded bottom drain connection.
Complete with side drain valve (538402 FD).
ANSI 150 flange connections.
Complete with drain valve (NA39753)
Max. working pressure: 150 psi.
Vessel temperature range: 32—270°F.
Particle separation capacity: to 5 µm (0.2 mil).
Code Description Lbs USD
546050A 2" ANSI flange 40 4,086.00
546060A 2½" ANSI flange 42 4,306.00
546080A 3" ANSI flange 73 5,547.00
546100A 4" ANSI flange 78 6,081.00
546120A 5" ANSI flange 181 8,772.00
546150A 6" ANSI flange 188 10,702.00
Insulation shell for DISCALDIRT
®
&
DISCALDIRTMAG
TM
.
MAXIMUM FLOW RATE
Size 1" 1¼" 1½" 2"
GPM 10 15 22 39
Cv 32 40 50 79
Code Description Lbs USD
CBN546002 Fits 1", 1¼" brass 546 only 0.1 128.00
CBN546118 Fits 1½" steel 5461 only 0.1 161.00
CBN546119 Fits 2" steel 5461 only 0.1 184.00
Code Description Lbs USD
546198A 1½" sweat union 22 1,863.00
546108A 1½" NPT female union 22 1,918.00
546168A 1½" press union 22 2,128.00
546199A 2" sweat union 23 1,952.00
546109A 2" NPT female union 23 2,026.00
546169A 2" press union 23 2,372.00
Air & Dirt separator with magnet.
Epoxy resin coated steel body.
Stainless steel float guide pin and linkage.
Stainless steel mesh internal element.
Complete with union connections.
Max. working pressure: 150 psi.
Working temperature range: 32 — 230°F
Particle separation capacity: to 5 µm (0.2 mil).
Ferrous impurities separation efficiency: 100%.
546
DISCAL
5461
DISCAL
®
®
The dirt separating action performed by the same element offers little
resistance to the medium flow while ensuring dirt separation. The particles
collide with the concentric diamond pattern mesh surfaces and then settle
to the bottom, and not by filtration unlike mesh strainers; which, over time,
get progressively clogged. By contrast, the DISCALDIRT
®
’s low-velocity
zone dirt separator function efficiently removes the particles to as small as
5µm (0.2 mil) with very low head loss. The dirt can then be removed through
the bottom drain port.
™
™