Brochure

17
1
Code Description Lbs USD
548006A 1" NPT female union 13 1,064.00
548066A 1" press union 13 1,140.00
548096A 1" sweat union 13 1,008.00
548007A 1¼" NPT female union 17 1,276.00
548067A 1¼" press union 17 1,452.00
548097A 1¼" sweat union 17 1,216.00
548008A 1½" NPT female union 25 1,672.00
548068A 1½" press union 25 1,884.00
548098A 1½" sweat union 25 1,592.00
548009A 2" NPT female union 27 1,948.00
548069A 2" press union 27 2,380.00
548099A 2" sweat union 27 1,860.00
548006US* 1" no tailpieces 11 800.00
548007US* 1¼" no tailpieces 15 900.00
548008US* 1½" no tailpieces 23 1,000.00
548009US* 2" no tailpieces 25 1,100.00
Hydraulic separator.
Epoxy resin coated steel body.
300 series stainless steel internal baffle.
Pre-formed insulation.
Thermowell tap: 1/2" straight female
Max. working pressure: 150 psi.
Working temperature range: 32—210°F.
Working temp. w/o insulation: 32—250°F.
548
Hydro Separator
HYDRAULIC SEPARATORS
Hydraulic separator.
Epoxy resin coated steel body.
Pre-formed insulation on 2"— 4" sizes.
Complete with:
automatic air vent (code 501502A).
shut-off valve (code NA39589).
drain valve (code NA39588).
ANSI 150 flange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—220°F.
Vessel temp. w/o insulation: 32—270°F.
Baffle plates for all sizes: 304SST
NA548
Hydro Separator
NA prefix indicates ASME U-stamp tagged and registered with the National
Board of Boiler and Pressure Vessel Inspectors; CRN registered.
*Without insulation
Code Description Lbs USD
548052A 2" ANSI flange 75 4,136.00
548062A
2½" ANSI flange
82 4,407.00
548082A 3" ANSI flange 112 5,513.00
548102A 4" ANSI flange 117 6,170.00
Code Description Lbs USD
NA548052A 2" ANSI flange ASME & CRN 75 5,442.00
NA548062A
2½" ANSI flange ASME & CRN
82 5,852.00
NA548082A 3" ANSI flange ASME & CRN 112 7,080.00
NA548102A 4" ANSI flange ASME & CRN 117 7,487.00
NA548120A* 5" ANSI flange ASME & CRN 220 10,459.00
NA548150A* 6" ANSI flange ASME & CRN 231 12,691.00
Hydraulic separator.
Epoxy resin coated steel body.
Without insulation.
Complete with:
automatic air vent (code 501502A).
shut-off valve (code NA39589).
drain valve (code NA59600).
ANSI 150 flange connections.
Thermometer pockets (NPT):
½" inlet/outlet flanges, ¾" front center
Max. working pressure: 150 psi.
Working temperature range: 32—270°F.
Baffle plates for all sizes: 304SST
ASME U-stamp tagged and registered with
the National Board of Boiler and Pressure
Vessel Inspectors; Consult factory for CRN
sizes 12" — 14".
NA548
Hydro Separator
ASME
Code Description Lbs USD
NA548200A 8" ANSI flange ASME & CRN 520 19,692.00
NA548250A 10" ANSI flange ASME & CRN 730 27,799.00
NA548300A 12" ANSI flange ASME 1,100 33,645.00
NA548350A 14" ANSI flange ASME 1,540 53,657.00
Combination 1. air, 2. hydraulic and 3. dirt
separation.
Epoxy resin coated steel body.
Stainless steel internal coalescing mesh.
Pre-formed insulation on 2"— 4" sizes.
Complete with: automatic air vent, air vent
shut-off valve, drain valve.
ANSI 150 flange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—220°F.
Working temp. w/o insulation: 32—270°F.
Particle separation capacity: to 5 μm (0.2 mil).
Consult factory for CRN sizes 12"— 14".
NA549
HydroCal
™
ASME
Code Description Lbs USD
NA549052A 2" ANSI flange ASME & CRN 73 7,074.00
NA549062A 2½" ANSI flange ASME & CRN 79 7,609.00
NA549082A 3" ANSI flange ASME & CRN 108 9,202.00
NA549102A 4" ANSI flange ASME & CRN 117 9,730.00
NA549120A* 5" ANSI flange ASME & CRN 190 14,071.00
NA549150A* 6" ANSI flange ASME & CRN 231 16,970.00
NA549200A* 8" ANSI flange ASME & CRN 520 29,373.00
NA549250A* 10" ANSI flange ASME & CRN 730 39,796.00
NA549300A* 12" ANSI flange ASME 1,100 52,372.00
NA549350A* 14" ANSI flange ASME 1,540 61,743.00
*Without insulation
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
*See fitting selection table in Section 8.