Install Instructions

Technical specifications
Materials
Body: epoxy resin coated steel
Air vent body: brass EN 12165 CW617N
Air vent hydraulic seal: EPDM
Air vent float: PP
Int. element: HDPE
Drain valve body: brass EN 12165 CW617N
Magnetic induction of ring system: 2,600 Gauss
Performance
Medium: water, glycol solution
Max percentage of glycol: 50%
Max working pressure: 150 psi (10 bar)
Temperature range: without insulation 32-230°F (0–110°C)
with insulation 32-210°F (0–100°C)
Connections
Threaded connections: 1”, 1 1/4”, 1 1/2”, 2” NPT F with unions
1”, 1 1/4”, 1 1/2”, 2” sweat with unions
Thermotap well connection: 1/2” F straight thread
Drain cock: hose connections
Technical specifications of insulation
Material: Closed-cell expanded PE-X
Thickness: 13/16” (20 mm)
Density: - Inner part: 1.9 lb/ft
3
(30 kg/m3)
- Outer part: 5.0 lb/ft
3
(80 kg/m3)
Conductivity (ISO 2581): - at 32°F (0°C); .16 BTU/in (0.038 W/(m·K)
- at 105°F (40°C); .26 BTU/in (0.045 W/(m·K)
Water vapor resistance coefficient (DIN 52615): > 1,300
Temperature range: 32-212°F (0-100°C)
Fire resistance (DIN 4102): Class B2
CAUTION: Make sure that all the connecting pipework is water tight.
CAUTION: When making the water connections, make sure that the
connecting pipework is not mechanically over-stressed. Over time this
could cause breakages, with consequent water losses which, in turn,
could cause harm to property and/or people.
CAUTION: Water temperatures higher than 100°F (38°C) can be
dangerous. During the installation, commissioning and maintenance of the
hydronic separator, take the necessary precautions to ensure that such
temperatures do not endanger people.
Leave this manual for the user.