Submittal Sheet

Code F G H J* K
Wt
(lb)
546550AM
6 5/8" ¾" 6" 6 5/16" 12" 41
546560AM
6 5/8" ¾" 7" 6 5/16" 12" 41
546580AM
8 5/8" ¾" 7 ½" 7 5/16" 13 3/8" 58
546510AM
8 5/8" ¾" 9" 7 5/16" 13 3/8" 58
®
magnetic dirt separator
5465M Steel series
CALEFFI
Technical Data
Materials
Body: epoxy resin painted steel
Internal element: stainless steel and HDPE
Hydraulic seal: non-asbestos fiber
Drain valve: brass
Magnet: neodymium rare-earth
Magnet probe dry-well: brass
Performance
Suitable Fluids: water, glycol solution
Max. percentage of glycol: 50%
Max. working pressure: 150 psi (10 bar)
Temperature range (vessel): 32 - 270°F (0–132°C)
Particle separation capacity: to 5 μm (0.2 mil)
Ferrous impurities separation efficiency: up to 100% removal
Connections:
flanged: 2" - 4" ANSI B16.5 150 CLASS RF
top: 3/4" M (with cap)
drain valve: 1" NPT
Vessel Volume
Application
In heating and air conditioning control systems, the circulation of
water containing impurities may result in rapid wear and damage
to components such as pumps and control valves. It also causes
blockages in heat exchangers, heating elements and pipes, resulting in
lower thermal efficiency within the system. The DIRTMAG
®
magnetic dirt
separator removes both ferrous and non-ferrous impurities continuously,
featuring powerful removable magnets that remove up to 100% of the
ferrous impurities, including magnetite, that can form in a hydronic
system, 2 ½ times the removal performance of a standard dirt
separator.
Submittal Data 02928.1 NA — Issue Date 05/2015
Dimensions
Code A B C D E
546550AM
2" 13 ¾" 1" 16 5/16" 23 7/8"
546560AM
2 ½" 13 ¾" 1" 16 5/16" 23 7/8"
546580AM
3" 18 3/8" 1" 20 11/16" 30 5/8"
546510AM
4" 18 3/8" 1" 20 11/16" 30 5/8"
*Allows for a minimum of 3" wall clearance to accommodate insulation if used.
Typical Specification
Furnish and install on the plans and described herein, a Caleffi D IRTMAG
®
magnetic dirt separator as manufactured by Caleffi. Each separator must
be designed with a blowdown drain port. The separator design must
include a large internal volume, and a stainless steel and HDPE internal
element to automatically remove all dirt present in the system with particle
separating capacity to 5 μm (0.2 mil), and a stack of neodymium rare-earth
magnets inside a brass dry-well, removable for purging, with up to 100%
ferrous impurities, including magnetite, separation efficiency. (See product
instructions for specific installation information.)
We reserve the right to change our products and their relevant technical data, contained in this publication, at any time and without prior notice. Contractors should request production drawings if prefabricating the system
.
Job name ______________________________________
Job location ______________________________________
Engineer ______________________________________
Mechanical contractor ________________________________
Contractor’s P.O. No. ________________________________
Representative ________________________________
Size ________________________________________
Quantity ________________________________________
Approval ________________________________________
Service ________________________________________
Tag No. ________________________________________
Notes ________________________________________
WALL
C
F
G
B
A
D
E
H
K
T
max
110 C
P
max
10 bar
T
max
105 C
P
max
10 bar
BI-DIRECTIONAL
F
J
2015
Size 2" 2 ½" 3" 4"
Capacity (gal)
1.8 1.8 4.8 4.8
FLOW RATE at 4 ft/sec
Size 2" 2½" 3" 4"
GPM 37 63 95 149
Cv 88 176 211 328