Install Instructions

5
WARNING: The symbol shown on the removable ring (A)
indicates the presence of magnets that generate a strong
magnetic field. This could cause damage to electronic devices
kept in its proximity.
1. Turn off circulator
2. Remove the ring (A) containing the two magnets and
pull out the flexible magnetic stack from the top drywell.
3. Open the ball shut-off valve (B) to drain the accumulated
dirt and ferrous impurity particles.
Procedure for removing insulation and draining dirt particles in
the DIRTMAG PRO 5463AM series
Draining off dirt and ferrous impurities
The dirt separator collection chamber has a drain
valve. Using the handle provided it is possible to drain
off the accumulated dirt particles without removing
the element from the fluid.
For the DIRTMAG PRO, captured impurities are
easily flushed by unclamping the magnetic collar,
pulling out the fexible magnet stack from the top-
mounted brass dry-well and opening the drain valve.
Allow for a minimum 4¾ inch space above the
separator to completely remove the magnet stack.
Aided by the system pressure, the dirt and ferrous
impurities, including magnetitie, flushes out quickly
and effectively.
For the brass DIRTMAG
®
, the ferrous impurities
are captured by a strong neodymium rare-
earth magnetic field created by a powerful
removable magnet around the body below
the flow line.
6
A
B