Brochure

PRODUCT RANGE - DIRTMAG
®
3D CROSS SECTION
03504-15 NA
MAX. WORKING PRESSURE 150 psi
WORKING TEMPERATURE RANGE 32 — 250°F (0 — 90°C)
MAX. GLYCOL 50%
PARTICLE SEPARATION CAPACITY 5 μm (0.2 mil)
FERROUS IMPURITIES REMOVAL EFFICIENCY up to 100%
PERFORMANCE
CODE CONNECTION
546306A 1” NPT
546328A 1” sweat
546307A 1¼” NPT
546335A 1¼”sweat
546308A 1½” NPT
546341A 1½” sweat
546309A 2” NPT
546354A 2” sweat
CONNECTIONS
DIRT SEPARATION
FERROUS IMPURITIES REMOVAL
The DIRTMAG® magnetic dirt separator re-
moves both ferrous and non-ferrous impurities,
continuously, featuring a powerful removable
external magnet around the body. The dirt
separator separates out dirt particles which are
mainly made up of particles of sand and rust,
collecting them in a large body chamber, from
which they can be removed even while the sys-
tem is in operation. This device is capable of
efficiently removing even the smallest particles,
with very low head loss.
Ferrous impurities, including magnetite, form in
hydronic systems when iron or steel corrodes.
The abrasive, extremely fine sediment is diffi-
cult to remove and can deposit onto heat ex-
hange surfaces and accumulate in pump cavi-
ties causing reduced efficiency and premature
wear. DIRTMAG® accomplishes 2 ½ times
the ferrous impurites removal performance of
standard dirt separators, delivering up to 100%
ellimination efficiency.
CONSTRUCTION
APPLICATION DIAGRAM
REFERENCE DOCUMENTATION: TECHNICAL BROCHURE 01137
CHILLER
Calef North America, Inc. 3883 W. Milwaukee Road Milwaukee, WI 53208
Tel. [phone] Fax [phone]
sales@calef .com · www.calef .com
© Copyright 2015 Calef North America, Inc.
WE RESERVE THE RIGHT TO CHANGE OUR PRODUCTS AND THEIR RELEVANT
TECHNICAL DATA, CONTAINED IN THIS PUBLICATION, AT ANY TIME AND WITHOUT
PRIOR NOTICE.
CODE CONNECTION
CBN546205 Fits ¾” & 1”
CBN546207 Fits 1¼” & 1½”
CBN546209 Fits 2”
Installation shell fits DIRTMAG
®
5463 series. Labels included for
field installation to externally iden-
tify product use.
CONNECTIONS