Install Instructions

Technical
specifications
Threaded connections
Materials: - body: brass EN 1982 CB 753S
- dirt collection chamber: brass EN 12165 CW617N
- top plug: brass EN 12164 CW614N
- int. element: PA66G30, stainless steel (vertical version)
- hydraulic seal: EPDM
- drain cock: brass EN 12165 CW617N
- magnet: - 5463, 5468 2 x 0,3 T
- 5466 - DN 50–65: 7 x 0,475 T
- DN 80–150: 12 x 0,475 T
- DN 200–300: 3 x 17 x 0,475 T
Medium: water, glycol solution
Max. percentage of glycol: 50%
Max. working pressure: 10 bar
Temperature range: 0–110°C
Connections: -
main: Ø 22 and Ø 28 compression end, 3/4”, 1”, 1 1/4”, 1 1/2”, 2” F
- top: 1/2” F (with plug)
- drain: hose connection
Flanged connections
Materials: - body: epoxy resin coated steel
- int. element: stainless steel EN 10088-3 (AISI 302)
(5466 stainless steel EN 10088-3 (AISI 302) and HDPE)
- hydraulic seal: non-asbestos fibre
- shut-off and drain valve body: brass EN 12165 CW617N,
(DN 200–DN 300)
- magnet pocket: brass EN 12164 CW614N
Medium: water, glycol solution non hazardous, therefore
excluded from the guidelines of 67/548/CEE Directive
Max. percentage of glycol: 50%
Max. working pressure: 10 bar
Temperature range: 0–110°C (5466 0–100°C)
Connections: - main:
PN 16: DN 50–DN 150; PN 10: DN 200–DN 300
- top: 3/4” M (with plug)
- temperature probe connections: 1/2” inlet/outlet (DN 200–DN 300)
- drain: 1” F (DN 50–DN 150); 2” F (DN 200–DN 300)
Product range
546205 3/4”
546206 1”
546207 1
1/4”
546208 1 1/2”
546209 2”
2
546902 Ø 22
546905 3/4”
546906 1
”
546315 3/4”
546316 1”
546317 1 1/4”
546318 1
1/2”
546319 2”
546305 3
/4”
546306 1”
546307 1 1/4”
546308 1 1/2”
546309 2”
546802 Ø 22
546803 Ø
28
546805 3/4”
546806 1
”
546550 DN 50
546560 DN 65
546580 DN 80
546510 DN 100
546512 DN 125
546515 DN 150
546520 * DN 200
546525 * DN 250
546530 * DN 300
*Without insulation and with floor supports
546650 DN 50
546660 DN 65
546680 DN 80
546610 DN 100
546612 DN 125
546615 DN 150
546620* DN 200
546625* DN 250
546630* DN 300