Product Overview

P
A
T
F
T
T
Tmax 110
ϒ
C
P
max 10 bar
Tmax 105
ϒ
C
P
max 10 bar
BI-DIRECTIONAL
T
P
F
A
T
Shut-off valve
Ball valve
BALLSTOP
Thermometer
Differential
by-pass valve
Flow switch
Zone valve
Pump
FlowCal
™
Stub pipe
Temperature
sensor
Safety
thermostat
Regulator
Expansion
tank
3-way cock
Pressure
switch
Control pocket
Gas filter
Gas regulator
Y-strainer
Fuel
shut-off valve
Air separator
Vibration
damping
coupler
Pocket
Pressure
relief valve
Backflow
preventer
We reserve the right to change our products and their relevant technical data, contained in this publication, at any time and without prior notice.
Caleffi North America, Inc.
3883 W. Milwaukee Road
Milwaukee, WI 53208
Tel: [phone] · Fax: [phone]
[e-mail] · www.caleffi.us
© Copyright 2012 Caleffi North America, Inc.
5462 Series DIRTCAL
®
— Brass with Sweat and NPT connections
Dirt separator in brass. NPT threaded connections from 3/4" to 2" and sweat connections 1" to 2". Top connection 1/2" F (with plug). Drain valve with
3/4" garden hose connection. Internal mesh element of glass reinforced nylon PA66G30, removable for cleaning. Brass body. EPDM hydraulic seals.
Suitable fluids: water or 50% maximum glycol solution. Maximum working pressure 150 psi (10 bar), Temperature range 32 to 250°F (0 to 120°C). Particle
separating capacity 5μm(0.2mil). Pre-formed insulation shells available separately for field installation.
5463 Series DIRTMAG
®
— Brass with Sweat and NPT connections
Dirt separator with magnet in brass. NPT threaded and sweat connections 1" to 2". Top connection 1/2" F (with plug). Drain valve with 3/4" garden
hose connection. Internal mesh element of glass reinforced nylon PA66G30, removable for cleaning. Brass body with an external removable magnet
belt, neodymium rare-earth. EPDM hydraulic seals. Suitable fluids: water or 50% maximum glycol solution. Maximum working pressure 150 psi (10 bar),
Temperature range 32 to 250°F (0to 120°C). Particle separating efficiency 5 μm (0.2 mil). Magnetic partcle separation efficiency: Up to 95% removal.
Pre-formed insulation shells available separately for field installation.
5465 Series DIRTCAL
®
— Flanged Steel
Dirt separator in steel. Flanged 150 CLASS ANSI connections from 2" to 4". Top connection 3/4" F (with plug). Bottom male 1" NPT for drain. Internal
mesh element of stainless steel. Fiber hydraulic seals. Suitable fluids: water or 50% maximum glycol solution. Maximum working pressure 150 psi (10
bar). Temperature range 32 to 250°F (0 to 120°C). Particle separating efficiency 5 μm (0.2 mil).
NA5465 Series DIRTCAL
®
— Flanged Steel*
Dirt separator in steel. Flanged 150 CLASS ANSI connections from 2" to 6". Top connection 3/4" F (with plug). Bottom male 1" NPT for drain. Internal
mesh element of stainless steel. Fiber hydraulic seals. Suitable fluids: water or 50% maximum glycol solution. Maximum working pressure 150 psi (10
bar). Temperature range 32 to 250°F (0 to 120°C). Particle separating efficiency 5 μm (0.2 mil).
*Flanged series NA5465 are designed and built in accordance with Section VIII, Division 1 of the AMSE Boiler and Pressure Vessel Code and tagged
and registered with the National Board of Boiler and Pressure Vessel Inspectors, CRN Registered.
NA5469 Series DIRTCAL
®
— Brass with Sweat connections
Dirt separator in brass. For vertical pipe installations sweat connections 3/4" to 1". Drain valve with hose connection. Internal mesh element of stainless
steel, removable for cleaning. Brass body. EPDM hydraulic seals. Suitable fluids: water or 50% maximum glycol solution. Maximum working pressure
150 psi (10 bar). Temperature range 32 to 250°F (0 to 120°C).
SPECIFICATION SUMMARIES
Application diagram