Brochure

5
1
Hydraulic separator.
Epoxy resin coated steel body.
300 series stainless steel internal baffle.
Pre-formed insulation.
Complete with:
automatic air vent valve (code 502343A).
service check valve (code 561402A).
drain valve (code 538402 FD).
Union connections.
Thermowell tap: 1/2" straight female
Max. working pressure: 150 psi.
Working temperature range: 32—210°F.
Working temp. w/o insulation: 32—250°F.
548
Hydro Separator
tech. broch. 01076
Code Description Lbs USD
548006A 1" NPT F union 13 1,010.00
548066A 1" Press F union 13 1,090.00
548096A 1" sweat union 13 961.00
548007A 1¼" NPT F union 17 1,217.00
548067A 1¼" Press F union 17 1,385.00
548097A 1¼" sweat union 17 1,160.00
548008A 1½" NPT F union 25 1,594.00
548068A 1½" Press F union 25 1,794.00
548098A 1½" sweat union 25 1,518.00
548009A 2" NPT F union 27 1,860.00
548069A 2" Press F union 27 2,280.00
548099A 2" sweat union 27 1,772.00
Hydraulic separator.
Epoxy resin coated steel body.
Pre-formed insulation on 2"— 4" sizes.
Complete with:
automatic air vent (code 501502A).
shut-off valve (code NA39589).
drain valve (code NA39588).
ANSI 150 flange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—220°F.
Vessel temp. w/o insulation: 32—270°F.
Baffle plates for all sizes: 304SST
548
Hydro Separator
tech. broch. 01076
Code Description Lbs USD
548052A 2" ANSI flange 75 3,696.00
548062A 2½" ANSI flange 82 3,938.00
548082A 3" ANSI flange 112 4,925.00
548102A 4" ANSI flange 117 5,513.00
Code Description Lbs USD
NA548052A 2" ANSI flange ASME & CRN 75 4,862.00
NA548062A 2½" ANSI flange ASME & CRN 82 5,229.00
NA548082A 3" ANSI flange ASME & CRN 112 6,326.00
NA548102A 4" ANSI flange ASME & CRN 117 6,689.00
NA548120A* 5" ANSI flange ASME & CRN 220 9,345.00
NA548150A* 6" ANSI flange ASME & CRN 231 11,340.00
NA prefix indicates ASME U-stamp tagged and registered with the National
Board of Boiler and Pressure Vessel Inspectors; CRN registered.
*Without insulation
The hydraulic separator creates a zone with a low pressure loss, which
enables the primary and secondary circuits connected to it to be hydraulically
independent of each other; the flow in one circuit does not interfere with flow
in the other.
Maximum recommended flow rates in GPM and volume capacity in gallons
for 548 and 5495 series separators.
Hydraulic separator.
Epoxy resin coated steel body.
Without insulation.
Complete with:
automatic air vent (code 501502A).
shut-off valve (code NA39589).
drain valve (code NA59600).
ANSI 150 flange connections.
Thermometer pockets (NPT):
½" inlet/outlet flanges, ¾" front center
Max. working pressure: 150 psi.
Working temperature range: 32—270°F.
ASME U-stamp tagged and registered with
the National Board of Boiler and Pressure
Vessel Inspectors; CRN registered.
Baffle plates for all sizes: 304SST
548
Hydro Separator
ASME/CRN
tech. broch. 01076
Code Description Lbs USD
NA548200A 8" ANSI flange ASME & CRN 520 18,386.00
NA548250A 10" ANSI flange ASME & CRN 725 25,956.00
NA548300A 12" ANSI flange ASME & CRN 1,100 31,415.00
NA548350A 14" ANSI flange ASME & CRN 1,400 50,100.00
HYDRAULIC SEPARATORS
FLOW RATE - FLANGED CONNECTIONS
Size 2" 2½" 3" 4" 5" 6" 8" 10" 12" 14"
GPM 60 80 124 247 300 484 792 1330 1850 2500
Gallons 4.0 4.0 8.0 8.0 22.5 23 95 175 255 450
FLOW RATE - UNION CONNECTIONS
Size 1" 1¼" 1½" 2"
GPM 11 18 26 37
Gallons 0.5 0.7 1.3 8.5