Brochure

13
55
1216
55
REPLACEMENT CARTRIDGE FOR DISCONTINUED 5230 VALVE
Replacement cartridge for 5230 series
thermostatic mixing valves.
Code Fits 5230… Cv. Lbs USD
523005 58A,66A 4.8 1.9 685.00
523006 60A,68A,70A,78A 8—10 2.5 966.00
523008 80A,90A 17—22 4.6 1,657.00
Replacing the cartridge
The internal cartridge, containing all the regulating components, can be
inspected and, if necessary, replaced, without the need to remove the valve
body from the pipe.
1) Close the shut-off valves on the hot and cold inlets. Set the knob to the
maximum value.
2) Remove the temperature regulating knob after unscrewing the lock
screw at the top. Dismantle the plastic knob frame. Unscrew the brass
plated protective cover by means of the hexagon (1"—1 ¼").
3) Remove the internal cartridge for inspection or replacement, using a
suitably sized spanner.
4) Refit the protective brass plated cover. Refit the plastic frame in such a
way that the position indicator is visible.
5) The spare cartridge is supplied pre-set to the maximum value. Position
the regulating knob in such a way that the letters MAX align with the
position indicator. By rotating the knob clockwise, it should be possible
to adjust the value from maximum to minimum. Fix the knob with the top
lock screw.
6) Reopen the shut-off valves and adjust the thermostatic mixing valve to
the required temperature value.
LOW LEAD SCALD PROTECTION THERMOSTATIC MIXING VALVES
Adjustable thermostatic and pressure
balanced mixing valve for point of use where
protected from scalding caused by hot
water with locking set point. Complete with
check valves on both hot and cold inlets.
Low-lead brass body.
Max. working pressure: 150 psi.
Max. inlet temperature: 185ºF.
Adjustable range: 85—120ºF.
Temperature control: ±3°F.
Min. flow for optimum performance: 0.5 gpm.
Meets requirements of ANSI/NSF 372-2011.
Certified to ASSE 1017, CSA B125.3, UPC,
IPC, Low Lead Laws and listed by ICC-ES
for use in accordance with the U.S. and
Canadian plumbing codes.
5213 Sweat
Scald Protection
Point-of-Use
tech. broch. 01092
Code Description Cv Lbs USD
521349A ½" sweat 2 2.0 259.20
521359A ¾" sweat 2 2.0 271.00
521369A 1" sweat 2 2.0 323.80
Adjustable thermostatic and pressure
balanced mixing valve for point of use where
protected from scalding caused by hot
water with locking set point. Complete with
check valves on both hot and cold inlets.
Low-lead brass body.
Max. working pressure: 150 psi.
Max. inlet temperature: 185ºF.
Adjustable range: 85—120ºF.
Temperature control: ±3°F.
Min. flow for optimum performance: 0.5 gpm.
Meets requirements of ANSI/NSF 372-2011.
Certified to ASSE 1017, CSA B125.3, UPC,
IPC, Low Lead Laws and listed by ICC-ES
for use in accordance with the U.S. and
Canadian plumbing codes.
5213 NPT
Scald Protection
Point-of-Use
tech. broch. 01092
Code Description Cv Lbs USD
521342A ½" NPT male 2 2.0 271.00
521352A ¾" NPT male 2 2.0 282.80
521362A 1" NPT male 2 2.0 335.80
ASSE 1070
ASSE 1070