Brochure

ManualsBrandsCaleffi ManualsHeating Supplies2" Sweat Pressure Reducing Valve w/o Gauge (Low Lead, Pre-adjustable)

MAGNETIC DIRT SEPARATORS

Code Description Lbs USD

NA545305 ¾" union NPT 4.5 266.60

NA545365 ¾" union press 4.5 288.60

NA545395 ¾" union sweat 4.5 264.60

NA545306 1" union NPT 4.5 306.90

NA545366 1" union press 4.7 346.90

NA545396 1" union sweat 4.5 292.30

NA5453

tech. broch. 01240

Dirt separator with magnet.

Brass mounting housing.

Composite PA66G30 body.

Max. working pressure: 45 psi.

Working temperature range: 32—195°F.

Particle separation capacity: to 5 µm (0.2 mil).

Ferrous impurities separation efﬁ ciency: 100%.

Drain valve with hose connection.

Top dosing point port.

Dosing capacity: 12 ﬂ uid oz.

Manual screw air vent.

The special coupling between the locking nut and the mounting base allows

the DIRTMAG

dirt separator to be rotated for installation to either vertical or

horizontal pipes, while maintaining the same operating performance.

The dirt separator with magnet combines the

action of the internal element and magnet. The

impurities in the water strike the internal element

and are separated, dropping into the bottom of

the body where they are collected.

Ferrous impurities are also trapped inside the dirt

separator body by two strong magnets inserted

into removable outer ring collar. The collected

impurities are discharged by removing the

external ring magnet and opening the drain valve,

this procedure can even be performed while the

system is in operation.

FLOW RATE

Size ¾" 1"

4.0 f/s GPM 8 9

Cv 12 19

Code Description Lbs USD

NA545355 ¾" union NPT with isolation valves 5.5 318.80

NA545356 1" union NPT with isolation valves 5.5 372.80