Brochure

2
16
The DISCALDIRT
®
air and dirt separator uses a coalescing element that
consists of an assembly of concentric diamond pattern mesh surfaces.
This element creates the whirling movement required to facilitate the release
of micro-bubbles and their adhesion to these surfaces. The bubbles, fusing
with each other, increase in volume until the bouyancy force overcomes the
adhesion force to the surface. They rise towards the top of the unit and are
released through a fl oat-operated automatic air release valve.
The dirt separating action performed by the same element which offers little
resistance to the medium fl ow while ensuring dirt separation. The particles
collide with the concentric diamond pattern mesh surfaces and then settle
to the bottom, and not by fi ltration unlike mesh strainers; which, over time,
get progressively clogged. By contrast, the DISCALDIRT
®
’s low-velocity-
zone dirt separator function effi ciently removes the particles to as small as
5µm (0.2 mil) with very low head loss. The dirt can then be removed through
the bottom drain port.
Air & Dirt separator.
Epoxy resin coated steel body.
Stainless steel fl oat guide pin and linkage.
Stainless steel mesh internal element.
ANSI 150 fl ange connections.
Complete with drain valve (NA39753)
Max. working pressure: 150 psi.
Vessel temperature range: 32—270°F.
Particle separation capacity: to 5 µm (0.2 mil).
tech. broch. 01123
Code Description Lbs USD
546050A 2" ANSI fl ange 40 3,651.00
546060A 2½" ANSI fl ange 42 3,848.00
546080A 3" ANSI fl ange 73 4,956.00
546100A 4" ANSI fl ange 78 5,433.00
546120A 5" ANSI fl ange 181 7,837.00
546150A 6" ANSI fl ange 188 9,562.00
®
546
Code Description Lbs USD
546096A 1" sweat 8.3 463.00
546016A 1" NPT male 8.3 486.00
546097A 1¼" sweat 8.3 552.00
Air & Dirt separator.
Brass body.
Stainless steel fl oat guide pin and linkage.
Glass reinforced nylon internal element.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Particle separation capacity: to 5 µm (0.2 mil).
®
Insulation shell fi ts brass
DISCALDIRT
®
546 only.
Code Description Pk Lbs USD
CBN546002 Fits ¾", 1", 1¼" 1 0.1 115.50
AIR AND DIRT SEPARATORS
Code Description Lbs USD
546195A ¾" sweat 8.5 486.50
546196A 1" sweat 8.5 554.00
546116A 1" NPT male 8.5 578.00
546197A 1¼" sweat 8.5 659.00
5461
tech. broch. 01287
Air & Dirt separator with magnet.
Brass body.
Stainless steel fl oat guide pin and linkage.
Glass reinforced nylon internal element.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Particle separation capacity: to 5 µm (0.2 mil).
Ferrous impurities separation effi ciency: 100%.
™
The DISCALDIRTMAG
™
air and dirt separator with
magnet uses an external magnet ring for separation of
ferrous impurities. The external magnet allows greater
effectiveness in the separation and collection of ferrous
impurities. The impurities are retained in the body of
the dirt separator by the strong magnetic fi eld created
by magnets in its external outer ring. The outer ring is
removable from the body to allow the fl ushing of sludge,
with the system still running. Since the magnetic ring
is positioned outside the body of the dirt separator, it
does not interfere with the fl ow through the device.
FLOW RATE
Size ¾" 1" 1¼" 1½" 2"
4.0 f/s GPM 8 9 10 15 25
10.0 f/s GPM 14 22 30 40 75
Cv 19 32 40 50 79
tech. broch. 01123
Code Description Lbs USD
546198A 1½" sweat union 22 1,633.00
546108A 1½" NPT female union 22 1,680.00
546168A 1½" Press union 22 1,780.00
546199A 2" sweat union 23 1,711.00
546109A 2" NPT female union 23 1,775.00
546169A 2" Press union 23 1,985.00
5461
tech. broch. 01287
Air & Dirt separator with magnet.
Epoxy resin coated steel body.
Stainless steel fl oat guide pin and linkage.
Stainless steel mesh internal element.
Complete with union connections.
Max. working pressure: 150 psi.
Working temperature range: 32 — 230°F
Particle separation capacity: to 5 µm (0.2 mil).
Ferrous impurities separation effi ciency: 100%.
™
May
2
May
2
May
016
May 2016