Brochure

3
100
121
9
100
STORAGE TANKS
ThermoCon™ thermal buffering tanks have
a porcelain glass coated steel lining and
powder coated steel external cover.
Drain port/valve.
Anode rods required when used in potable
water applications.
Max. working pressure: 150 psi.
Working temperature: 35—180ºF.
Recommended max. delivery water tem-
perature: 120ºF.
Testing pressure: 300 psi.
Tank insulation: 2" non-CFC foam.
Insulation thermal conductivity: R16.
Connections (all FNPT):
25 gal: top; two 1-1/2", one 3/4". sides;
four 1-1/2", one 3/4".
50, 80, 119 gal: top; three 3/4", sides; seven 2".
NAS200
ThermoCon™
Code Description Lbs USD
NAS20025 ThermoCon™ 25 gal. 100 2,013.00
NAS20050 ThermoCon™ 50 gal. 200 2,406.00
NAS20080 ThermoCon™ 80 gal. 250 2,844.00
NAS20120 ThermoCon™ 119 gal. 350 3,763.00
STORAGE TANK ACCESSORIES
Reducer bushing fits tanks without HX for
installing temperature probe.
Low lead brass
1 5/8" hex head.
Code Description Lbs USD
NA10234 2" NPT male x ¾" NPT female 0.4 50.50
Pipe nipple for attaching air vent to top of
storage tank with reducing bushing.
Code Description Lbs USD
NA10160 ½" NPT male x ½" male NPT x 3" 0.1 8.20
EXPANSION TANK
Solar system expansion tanks with ¾"
straight thread.
System temp. range: 15—250°F.
Maximum diaphragm temp: 160°F.
Maximum working pressure: 150 psi.
Pre-charge pressure: 35 psi.
Maximum percentage of glycol: 50%.
259
Expansion tank fitting connections. ¾"
union nut connects to the expansion tank.
Expansion tank connection kit.
Includes ¾" connection, wall bracket,
hardware and double check valve.
255
Code Description Lbs USD
259012 3 gallon, ¾" male straight thread 14 109.00
259018 5 gallon, ¾" male straight thread 17 135.00
259025 7 gallon, ¾" male straight thread 21 175.00
259033 9 gallon, ¾" male straight thread 24 298.00
259050 13 gallon, ¾" male straight thread 28 376.00
Code Description Lbs USD
255007 S.S. flexible tank connection kit 3.0 127.00
Code Description Lbs USD
NA25540 ½" NPT union connection set 0.1 18.60
NA25549 ½" sweat union connection set 0.1 17.20
Sensor well, ¼" Ø I.D. Insertion length: 1¾".
Code Description Lbs USD
NA15029 Sensor well, ¾" NPT male thread 0.5 35.30
Cap for plugging tank connection
on pump station while leak testing.
Requires R50058 washer.
Code Description Lbs USD
R21180 ¾" female cap 0.1 4.00