Submittal Sheet

We reserve the right to change our products and their relevant technical data, contained in this publication, at any time and without prior notice.
Caleffi North America, Inc.
3883 W. Milwaukee Road
Milwaukee, WI 53208
Tel: [phone] · Fax: [phone]
[e-mail] · www.caleffi.com
© Copyright 2021 Caleffi North America, Inc.
AngleMix
™
5205__A(C) series - angle style thermostatic mixing valve
Adjustable thermostatic and pressure balanced angle style mixing valve, certified by ICC-ES to ASSE 1017-2009 and CSA B125.3, approved for point
of distribution domestic water systems. Connections ½", ¾" and 1" NPT male, press or sweat union. DZR low-lead brass valve body (<0.25% Lead
content) certified by ICC-ES file 1360. Meets requirements of NSF/ANSI 372-2011. Shutter, regulating seats and sliding surfaces in anti-scale plastic, PSU.
Seals peroxide-cured EPDM. Stainless steel spring. Maximum working temperature 195 degrees F (90 degrees C). Setting range 95 degrees F to 150
degrees F (35 degrees C to 65 degrees C). Maximum working pressure 150 psi (10 bar). Maximum operating differential pressure 75 psi (5 bar). Tolerance
±3 degrees F (±2 degrees C). Flow rating: Cv 2.0 (Kv 1.7). Provided with tamper-proof setting lock and mixed outlet temperature gauge, 30 degrees F
to 210 degrees F scale, 2 inch diameter. Provide with inlet port check valves, AC models.
SPECIFICATION SUMMARIES
AngleMix
™
5200X1A - angle style thermostatic mixing valve
Adjustable thermostatic and pressure balanced angle style mixing valve, certified by ICC-ES to ASSE 1017-2009 and CSA B125.3, approved for point of
distribution domestic water systems. Connections 1" male union (code 520051A) and 1¼" male union (code 520061A). DZR low-lead brass valve body
(<0.25% Lead content) certified by ICC-ES file 1360. Meets requirements of NSF/ANSI 372-2011. Shutter, regulating seats and sliding surfaces in anti-scale
plastic, PSU. Seals peroxide-cured EPDM. Stainless steel spring. Maximum working temperature 195 degrees F (90 degrees C). Setting range 95 degrees
F to 150 degrees F (35 degrees C to 65 degrees C). Maximum working pressure 150 psi (10 bar). Maximum operating differential pressure 75 psi (5 bar).
Tolerance ±3 degrees F (±2 degrees C). Flow rating: Cv 2.0 (Kv 1.7), code 520-51A; Cv 3.5 (Kv 3.0), code 520061A. Provided with tamper-proof setting
lock. Provide with separately supplied mixed outlet temperature gauge, 30 to 210 degrees F scale, 2 inch diameter. Provide with separately supplied
end connection fittings, with or without check valves, for ½", ¾", or 1" NPT male, NPT female, press, PEX crimp or sweat with 1" union nut and washer.
Replacement parts
Point of distribution mixed temperature
gauge adaptor fits 1" male union thread
mixing valves. Removable gauge fits
into temperature well. Gauge dial is 2"
diameter and scale from 30—210º F.
Low-lead brass body. Meets requirements
of NSF/ANSI 372-2011. Certified to:
ASSE 1017/CSA B125.3, Low lead, by
ICC-ES file PMG-1360.
Replacement body.
Meets requirements of NSF/ANSI 372-
2011. Certified to: ASSE 1017/CSA
B125.3, Low lead, by ICC-ES file PMG-
1360.
End connection flexibility: ½", ¾" or 1" npt
female or male, press, PEX barb or sweat
with or without check valves, separately
sourced for field installation. See Caleffi
List Price catalog for fitting selection.
NA10056.....................................................................¾" sweat with gauge
NA10358 ...........................................................1" union thread with gauge
688003A.......................................................................Replacement gauge
520051A...................
1" male union thread, ½" & ¾" vavles. Cv=2.0 (Kv=1.7)
520061A..............................
1" male union thread, 1" valve. Cv=3.5 (Kv=3.0)