Brochure

84
10
A
Flat plate collector mounting brackets and
wide strut mount.
SOLAR COLLECTORS
Flashing kit with Ǫ" stud for attaching
U mounts and other brackets using the
supplied Ǫ“ stainless steel nut & washer.
Black painted aluminum 6061 T6 fl ashing
14¾"L x 9½"W x 0.6"H ,galvanized steel
base plate with six mounting holes and
double stud.
Galvanized steel base plate with Ǫ"-16
center thread and six mounting holes, can
be used under a truss or rafter.
Aluminum 6005-T5 square tube extension
for tilting fl at plate collectors. Connects
with tilt mounting U brackets.
Code Description Lbs USD
NAS10001 Universal foot mount, 4 each 5.0 293.00
NAS10004 Wide strut mount, 4 each 1.0 175.60
Code Description Lbs USD
NAS10002 1" square tube x 6' 2.0 147.00
NAS10005 1" square tube x 12' 4.0 263.30
Code Description Lbs USD
NAS10030 Flashing kit 1.5 82.30
Code Description Lbs USD
NAS10032 Steel base plate 0.5 30.00
Star Max 4™ fl at plate collectors heat fl uid from solar energy for solar water
heater and space heating systems.
Fluids: water, glycol solutions.
Maximum percentage of glycol: 60%.
Working pressure: 90 psi.
Max. test pressure: 150 psi.
Working temperature: -40—350ºF.
Typical transfer fl ow rate: 0.5—1.8 gpm.
Wind load rating: 180 mph.
Connection: 1¼" male union thread
SRCC Category C: 40 kBtu/day.
Approvals: SRCC OG-100.
NAS144
StarMax 4
™
tech. broch. 01173
Code Description Lbs USD
NA10478 1¼" double union nut coupler 0.4 98.90
Code Description Lbs USD
NAS14406 4’ x 6.5’, Category C 25 kBtu/day 90 2,736.00
NA10100 Crating charge for NAS14406 (1—10) net 110.00
NAS14408 4’ x 8’, Category C 32 kBtu/day 113 3,231.00
NAS14410 4’ x 10’, Category C 40 kBtu/day 153 3,599.00
NA10126 Crating for NAS14408 / NAS14410 (1—6) net 110.00
The 1¼" male union threads on the StarMax 4
collector have a flat sealing surface The
NAS10478 double union allows the collectors
to be joined close together, but still allows for a
collector to be removed from
an array without moving the
adjoining collectors. The double union has pre-
installed high temperature silicone O-rings which
seal against the coupling fl at surface and will not
fallout during coupling. This provides fast torch free
connections.
Double union nut coupler
high temperature silicone O-ring
pre-installed inside union.
Components required to cap unused 1¼"
male union outlets on StarMax 4 collector.
1¼" brass nut (1), 1¼" brass disk (1) and
1¼" silicon sealing washer (1).
Code Description Lbs USD
R31495 1¼" union nut 0.2 9.50
R11059 1¼" brass disk 0.1 6.00
R67032 1¼" high temp silicon washer 0.1 2.90
NEW
NEW