Brochure

4
1
Code Description Lbs USD
549596A 1" sweat union 15 1,315.00
549506A 1" NPT F union 15 1,375.00
549566A 1" Press F union 15 1,455.00
549597A
1 ¼" sweat union
19 1,585.00
549507A
1¼" NPT F union
19 1,665.00
549567A
1¼" Press F union
19 1,833.00
549598A
1½" sweat union
27 2,080.00
549508A
1½" NPT F union
27 2,185.00
549568A
1½" Press F union
27 2,385.00
549599A 2" sweat union 29 2,425.00
549509A 2" NPT F union 29 2,545.00
549569A 2" Press F union 29 2,965.00
4-IN-1 HYDRAULIC SEPARATORS
Combination 1. air, 2. hydraulic and 3. dirt
separation, plus 4. magnetic separation.
Epoxy resin coated steel body.
Stainless steel internal coalescing mesh.
Three neodymium magnets.
Complete with:
automatic air vent (code 501502A).
air vent shut-off valve (code NA39589).
drain valve (code NA59600).
ANSI 150 fl ange connections.
Thermometer pockets (NPT):
½" inlet/outlet flanges, ¾" front center
Max. working pressure: 150 psi.
Vessel temperature range: 32—270°F.
Particle separation capacity: to 5 µm (0.2 mil).
ASME U-stamp tagged and registered with
the National Board of Boiler and Pressure
Vessel Inspectors; CRN consult factory.
549
SEP
™
ASME
tech. broch. 01249
FLOW RATE - FLANGED CONNECTIONS
Size 2" 2½" 3" 4" 5" 6" 8" 10" 12" 14"
GPM 60 80 124 247 300 484 792 1330 1850 2500
Gallons 4.0 4.0 8.0 8.0 23 23 95 175 255 450
FLOW RATE - UNION CONNECTIONS
Size 1" 1¼" 1½" 2"
GPM 11 18 26 37
Gallons 0.5 0.7 1.3 3.5
Code Description Lbs USD
NA549200AM 8" ANSI flange ASME 530 27,425.00
NA549250AM 10" ANSI flange ASME 740 37,158.00
NA549300AM 12" ANSI flange ASME 1,110 48,900.00
NA549350AM 14" ANSI flange ASME 1,550 57,650.00
Combination 1. air, 2. hydraulic and 3. dirt
separation, plus 4. magnetic separation.
Epoxy resin coated steel body.
HDPE internal coalescing element,
removable for cleaning.
Pre-formed insulation.
Particle separation capacity: to 5 µm (0.2 mil).
Ferrous impurities separation effi ciency: 100%.
Air separation effi ciency: 100% to
microbubble level.
Complete with union connections.
Thermowell tap: 1/2" straight female.
Max. working pressure: 150 psi.
Working temperature range: 32—210°F.
Working temp. w/o insulation: 32—230°F.
5495
SEP
™
tech. broch. 01249
Combination 1. air, 2. hydraulic, 3. dirt
separation, plus 4. magnetic separation.
Epoxy resin coated steel body.
Stainless steel internal coalescing mesh.
Pre-formed insulation on 2"— 4" sizes.
One neodymium magnet.
Complete with:
automatic air vent (code 501502A).
air vent shut-off valve (code NA39589).
drain valve (code NA39588).
ANSI 150 fl ange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—220°F.
Working temp. w/o insulation: 32—270°F.
Particle separation capacity: to 5 µm (0.2 mil).
549
SEP
™
tech. broch. 01249
* without insulation
NA prefi x indicates ASME U-stamp tagged and registered with the National
Board of Boiler and Pressure Vessel Inspectors; CRN registered.
Code Description Lbs USD
NA549052AM 2" ANSI flange ASME & CRN 76
6,805.00
NA549062AM 2½" ANSI flange ASME & CRN 82 7,305.00
NA549082AM 3" ANSI flange ASME & CRN 112 9,042.00
NA549102AM 4" ANSI flange ASME & CRN 120 9,535.00
NA549120AM* 5" ANSI flange ASME & CRN 220 13,138.00
NA549150AM* 6" ANSI flange ASME & CRN 235 15,845.00
NEW
NEW
NEW
NEW
In the SEP4
™
hydraulic separators
ferrous impurities are captured by a
concentrated magnetic fi eld created
by a stack of neodymium rare-earth
magnets positioned inside a brass
dry-well which is below the fl ow
stream. Non-magnetic dirt particles
are separated by colliding with an
internal element in the fl ow stream
and settling to the bottom. The deep
collection chamber keeps the dirt
from re-entering the fl ow stream.
The dirt and ferrous impurities are
fl ushed out while the system is
operating, by removing the magnets
and opening the purge valve.
Code Description Lbs USD
549552A 2" ANSI flange 76 5,846.00
549562A
2½" ANSI flange
82 6,229.00
549582A 3" ANSI flange 112 7,795.00
549510A 4" ANSI flange 120 8,730.00