Brochure

2
20
Dirt separator.
Epoxy resin coated steel body.
1"threaded NPT bottom drain connection
Complete with drain valve (code NA39753).
¾" NPT male top thread with brass cap.
ANSI 150 fl ange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—270°F.
Particle separation capacity: to 5 µm (0.2 mil).
Dirt separator.
Epoxy resin coated steel body.
1"threaded NPT bottom drain connection
Complete with drain valve (code NA39753).
¾" NPT male top thread with brass cap.
ANSI 150 fl ange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—270°F.
Particle separation capacity: to 5 µm (0.2 mil).
ASME and CRN registered.
tech. broch. 01137
tech. broch. 01137
5465
NA5465
Drain ball valve.
Fits DIRTCAL
®
5465 and NA5465 series.
Brass body.
Lever
Max. working pressure: 150 psi.
Max. working temperature: 365°F.
ASME/CRN
DIRT SEPARATORS
MAXIMUM FLOW RATE
Size 2" 2½" 3" 4" 5" 6"
GPM 89 150 227 355 816 904
Cv 88 176 211 328 520 842
#HQSRDO@Q@SHNMDEkBHDMBX
1000
Efficiency
50 passages ( 2 f/s)
50 20 10
40
20
0
60
80
100
Efficiency (%)
Efficiency
50 passages ( 4 f/s)
Micro
particle size
(μm)
0
5
16 35 63
105 150 250 210 500
WORKING ZONE
CARTRIDGE FILTERS
SPECIAL STRAINERS
Y-STRAINERS
Separated quantity
Initial quantity
.
100%
(
)
®
The dirt separating action performed by the DIRTCAL
®
is based on using
the internal element with concentric diamond pattern mesh surfaces
instead of a mechanical fi lter. The element offers little resistance to the
medium fl ow while ensuring dirt separation. This occurs due to the
particles colliding with the concentric diamond pattern mesh surfaces
and then settling to the bottom, and not by fi ltration; which, over time,
gets continuously clogged. By contrast, the DIRTCAL
®
low-velocity-zone
dirt separator effi ciently removes the particles to as small as 5 µm (0.2 mil)
with very low head loss. The dirt collection chamber at the bottom of the
DIRTCAL
®
is at the optimal distance from the inlet and outlet connections
that the collected dirt particles are not affected by the swirling fl ow
through the mesh element. The dirt can then be removed through the
bottom drain port even with the system running, by opening the drain valve.
+NVGD@CKNRRDR@MCODQENQL@MBD@QDL@HMS@HMDCNUDQSHLD
Code Description Lbs USD
546550A 2" ANSI flange 38 2,031.00
546560A 2½" ANSI flange 38 2,185.00
546580A 3" ANSI flange 55 2,955.00
546510A 4" ANSI flange 55 3,269.00
Code Description Cv Lbs USD
NA39753 1" NPT female with lever 50 0.7 57.00
Code Description Lbs USD
NA546550A 2" ANSI flange ASME & CRN 38 3,150.00
NA546560A 2½" ANSI flange ASME & CRN 38 3,351.00
NA546580A 3" ANSI flange ASME & CRN 55 4,364.00
NA546510A 4" ANSI flange ASME & CRN 55 4,776.00
NA546512A 5" ANSI flange ASME & CRN 138 6,886.00
NA546515A 6" ANSI flange ASME & CRN 148 8,832.00
Dirt separator.
Epoxy resin coated steel body.
1"threaded NPT bottom drain connection
Complete with drain valve (code NA39753).
¾" NPT male top thread with brass cap.
ANSI 150 fl ange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—270°F.
Particle separation capacity: to 5 µm (0.2 mil).
ASME registered. For CRN consult factory.
tech. broch. 01137
NA5465
ASME
Code Description Lbs USD
NA546520A 8" ANSI flange ASME 335 18,060.00
NA546525A 10" ANSI flange ASME 620 27,840.00
NA546530A 12" ANSI flange ASME 870 34,480.00
NA546535A 14" ANSI flange ASME 1,000 43,350.00
NEW
NEW
MAXIMUM FLOW RATE
Size 8" 10" 12" 14"
GPM 1,570 2,450 3,525 4,800
Cv 1,055 1,400 1,755 2,075
ASME U-stamp tagged and registered with the National Board of Boiler
and Pressure Vessel Inspectors registered.
ASME U-stamp tagged and registered with the National Board of Boiler
and Pressure Vessel Inspectors registered.
®
®
®