Brochure

2
18
Code Description Lbs USD
546328A
1" sweat
4.2 322.50
546306A 1" NPT female 4.2 338.60
546366A 1" integral press 4.5 367.30
546335A 1¼" sweat 4.2 470.90
546307A 1¼" NPT female 5.3 494.40
546367A 1¼" integral press 5.6 563.20
546341A 1½" sweat 4.9 613.40
546308A 1½" NPT female 6.2 643.70
546354A 2" sweat 5.5 748.20
546309A 2" NPT female 6.2 776.40
Code Description Lbs USD
546205A ¾" NPT female 4.2 254.50
546228A 1" sweat 4.2 267.90
546206A 1" NPT female 4.2 281.30
546266A 1" integral press 4.5 323.10
546235A 1¼" sweat 4.2 390.30
546207A 1¼" NPT female 5.3 409.80
546267A 1¼" integral press 5.6 497.60
546241A 1½" sweat 4.9 505.40
546208A 1½" NPT female 6.2 530.90
546254A 2" sweat 5.5 621.80
546209A 2" NPT female 6.2 652.10
Dirt separator with magnet.
Brass body.
½" NPT top thread with plug.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Particle separation capacity: to 5 µm (0.2 mil).
Ferrous impurities separation effi ciency: 100%.
tech. broch. 01137
5463
The versatile DIRTMAG
®
magnetic dirt
separator removes both magnetic and non-
magnetic particles continuously. In addition
to removing sand and rust impurities with a
glass-reinforced nylon internal element in a
low-velocity-zone chamber, the DIRTMAG
®
features a powerful removable external
magnet around the body below the fl ow
line for fast and effective capture of ferrous
particles. The DIRTMAG
®
has the magnet
positioned externally to maintain low pressure
loss, and removes up to 100% of the ferrous
impurities that can form in a hydronic system.
The DIRTMAG
®
can be fi tted with optional
insulated covers, code CBN5462xx series
purchased separately, to minimize heat loss.
Insulation shell fi ts DIRTCAL
®
5462 and
DIRTMAG
®
5463 series.
Labels included for fi eld installation to
externally identify product use.
Replacement drain valve fi ts DIRTCAL
®
5462 series and DIRTMAG
®
5463 series.
Brass body.
Max. working pressure: 150 psi.
Max. working temperature: 250°F.
The dirt separating action performed by the DIRTCAL
®
is based on using
the internal element with concentric diamond pattern mesh surfaces
instead of a mechanical fi lter. The element offers little resistance to the
medium fl ow while ensuring dirt separation. This occurs due to the
particles colliding with the concentric diamond pattern mesh surfaces
and then settling to the bottom, and not by fi ltration; which, over time,
gets continuously clogged. By contrast, the DIRTCAL
®
low-velocity-
zone dirt separator requiring a pressure drop 25% or less that of a
comparable Y-strainer depending on mesh size and amount of fi ltered
debris and effi ciently removes the particles to as small as 5 µm (0.2 mil)
with very low head loss. The dirt collection chamber at the bottom of the
DIRTCAL
®
is at the optimal distance from the inlet and outlet connections
that the collected dirt particles are not affected by the swirling fl ow
through the mesh element. The dirt can then be removed through the
bottom drain port even with the system running, by opening the drain valve.
+NVGD@CKNRRDR@MCODQENQL@MBD@QDL@HMS@HMDCNUDQSHLD
DIRT & MAGNETIC DIRT SEPARATORS
tech. broch. 01137
Dirt separator.
Brass body.
½" NPT top thread with plug for optional air
vent, code 502243A.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Particle separation capacity: to 5 µm (0.2 mil).
5462
MAXIMUM FLOW RATE
Size ¾" 1" 1¼" 1½" 2"
GPM6 10152239
Cv 19 32 56 73 81
Code Description Lbs USD
538402 FD ½" NPT male x ¾" GHT 0.3 20.30
Code Description Lbs USD
CBN546205
Fits ¾" & 1" DIRTCAL
®
, DIRTMAG
®
0.1 76.80
CBN546207 Fits 1¼" & 1½" DIRTCAL
®
, DIRTMAG
®
0.1 82.30
CBN546209 Fits 2" DIRTCAL
®
, DIRTMAG
®
0.1 90.00
DIRTCAL
®
to DIRTMAG
®
Retrofi t kit.
NEW
NEW
Code Description Lbs USD
F41661A Retrofit kit 2.0 156.80