Brochure

PRESS CONNECTION BENEFITS
MAX. WORKING PRESSURE 200 psi (14 bar)
MAX. WORKING TEMPERATURE: 250°F (120°C)
MAX PERCENT OF GLYCOL: 50%
COPPER PIPE COMPATIBILITY: type K, L & M
CONNECTION SIZES: ½", ¾", 1", 1¼", 1½" & 2" copper
PERFORMANCE
REFERENCE DOCUMENTATION
Calef North America, Inc. · 3883 W Milwaukee Road · Milwaukee, WI 53208
Tel. [phone] · Fax [phone]
sales@calef.com · www.calef.com
© Copyright 2016 Calef North America, Inc.
WE RESERVE THE RIGHT TO CHANGE OUR PRODUCTS AND THEIR RELEVANT
TECHNICAL DATA, CONTAINED IN THIS PUBLICATION, AT ANY TIME AND
WITHOUT PRIOR NOTICE.
PRESSCON
™
press connections are fast and easy installation with up to 60% time reduction. No
proprietary tool required, works with industry standard tools. Water service connections can be made
wet or dry, making repairs fast and easy.
Special slots in EPDM O-ring allows fluid to leak during system testing if unpressed and the perfect
leak proof seal when completely pressed.
With no open flame required, PRESSCON
™
eliminates the costs of solder, flux, torches, fire
extinguishers, fire watch, hot work permits and other open flame requirements by Fire Prevention
Code and OSHA.
PRESSCON
™
works with standard copper (K, L or M) pipe conforming to ASTM-B88. Factory
installed EPDM O-rings. Low-lead are certified to NSF/ANSI 372.
03511-16 NA
CHARACTERISTICS
Presscon
™
L
E
A
K
D
E
T
E
C
T
I
O
N
Annealed copper body
EPDM O-ring
Slots for leak
detection in O-ring
INSTALLATION
Patent Pending