Install Instructions

SAFETY INSTRUCTION
This safety alert symbol will be used in this manual to draw attention to
safety related instructions. When used, the safety alert symbol means
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! FAILURE
TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN A SAFETY
HAZARD.
CAUTION: All work must be performed by qualified
personnel trained in the proper application, installation,
and maintenance of systems in accordance with all
applicable codes and ordinances.
CAUTION: Over-tightening and breakage can occur
with the use of Teflon
®
pipe joint compounds. Teflon
®
provides lubricity so that care must be exercised not to
over-tighten joints. Failure to follow these instructions
could result in property damage and /or personal injury.
WARNING: System fluids are under pressure or
temperatur
e can be hazardous. Be sure the pressure
has been r
educed to zer
o and the system temperature is
below 100°F (38°C). Failure to follow these instructions
could r
esult in pr
oper
ty damage and/or personal injur
y
.
Technical Characteristics
Connection: 1/8” NPT Male
Maximum Working Pressure: Hot Water: 150 psig (10 bar)
Steam: 15 psig (1 bar)
Maximum Peak Temperature: 230°F (110°C)
Maximum Working Temperature: 212°F (100°C)
Body Material: Chrome-plated Brass
Automatic Hygroscopic Air Vent for radiators
38455
5080 Series
www.caleffi.com
CALEFFI

Summary of content (2 pages)