Product Overview

80
10
A
BOILER TRIM KITSSOLAR COLLECTORS
Star Max V™ fl at plate collectors heat fl uid from solar energy for solar
water heater and space heating systems.
Fluids: water, glycol solutions.
Maximum percentage of glycol: 60%.
Working pressure: 90 psi.
Max. test pressure: 150 psi.
Working temperature: -40—350ºF.
Typical transfer fl ow rate: 0.5—1.2 gpm.
Wind load rating: 180 mph.
Connections: (5) 1" male union thread.
SRCC Category C: 40 kBtu/day.
Approvals: SRCC OG-100.
Patented.
Code Description Lbs USD
NAS15410 StarMax V™ 4’ x 10’, fi ve outlets 153 3,625.00
NA10126 Crating for NAS15410 (1—6 collectors) net 100.00
The StarMax V™ patented fl at plate collector is designed with two internal
headers which are sloped to the center by ½" from each side. In the center
of bottom sloped header is a fi fth outlet which allows for fi lling and draining of
fl uid from the collector. This unique sloped internal headers allow the collector
array to be mounted perfectly horizontal, rather then sloped in drainback
installation. The bottom outlets are connected to an external sloped manifold
on or under the roof. When used in a standard pressured glycol installation,
the bottom center outlet is capped and the array is connected the same way
as a standard four outlet collector.
Function
DrainAacJ installation
NAS154
StarMax V
™
tech. broch. 01271
Standard PressuriYed installation
Header - riser tubes: copper.
Absorber fi n: copper.
Fin coating: blue selective.
Connection: 1" union thread.
Outlet grommets: silicone
Frame: extruded aluminum.
Frame: powdered coated.
Frame: welded corners.
Back sheet: embossed PVC
Insulation liner: foil
Insulation: injected molded polyurethane Insulation
Glass: tempered low iron prismatic.
Glass thickness: 4 mm.
Construction details
External manifold is connected to the bottom outlet of each collector and is
sloped ¼" per foot for proper fl ow in drainback installation. Collector top and
bottom headers are connected together with code NA10272 collector union
and opposite outlets are capped with code 586600 cap.
Bottom outlets of each collector remained capped for standard installation.
Collector top and bottom headers are connected together with code
NA10272 collector union and opposite outlets are capped with code 586600.
Features
Temperature sensor well weather
tight grommet is attached direct to
absorber fi n for accurate collector
temperature measurement in
drainback installations. Fully welded
frame keeps collector frame ridged
and weather tight.
Bottom center outlet is protected
with a 586600 factory installed cap.
Removable bottom outlet access
cover allows for easy absorber
removal. Baked on powered
coating protects collector frame
from harsh salt spray environments.