Product Overview

2
5
1
5
Hydraulic separator.
Epoxy resin coated steel body.
300 series stainless steel internal baffle.
Pre-formed insulation.
Complete with:
automatic air vent valve (code 502343A).
service check valve (code 561402A).
drain valve (code 538402 FD).
Union connections.
Thermowell tap: 1/2" straight female
Max. working pressure: 150 psi.
Working temperature range: 32—210°F.
Working temp. w/o insulation: 32—250°F.
548
Hydro Separator
tech. broch. 01076
Code Description Lbs USD
548006A 1" NPT F union 13 1,063.00
548096A 1" sweat union 13 1,012.00
548007A 1¼" NPT F union 17 1,281.00
548097A 1¼" sweat union 17 1,221.00
548008A 1½" NPT F union 25 1,678.00
548098A 1½" sweat union 25 1,598.00
548009A 2" NPT F union 27 1,958.00
548099A 2" sweat union 27 1,865.00
Hydraulic separator.
Epoxy resin coated steel body.
Pre-formed insulation on 2"— 4" sizes.
Complete with:
automatic air vent (code 501502A).
shut-off valve (code NA39589).
drain valve (code NA39588).
ANSI 150 flange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—220°F.
Vessel temp. w/o insulation: 32—270°F.
Baffle plates for all sizes: 304SST
548
Hydro Separator
tech. broch. 01076
Code Description Lbs USD
548052A 2" ANSI flange 75 3,696.00
548062A 2½" ANSI flange 82 3,938.00
548082A 3" ANSI flange 112 4,925.00
548102A 4" ANSI flange 117 5,513.00
Code Description Lbs USD
NA548052A 2" ANSI flange ASME & CRN 75 4,862.00
NA548062A 2½" ANSI flange ASME & CRN 82 5,229.00
NA548082A 3" ANSI flange ASME & CRN 112 6,326.00
NA548102A 4" ANSI flange ASME & CRN 117 6,689.00
NA548120A* 5" ANSI flange ASME & CRN 220 9,345.00
NA548150A* 6" ANSI flange ASME & CRN 231 11,340.00
NA prefix indicates ASME U-stamp tagged and registered with the National
Board of Boiler and Pressure Vessel Inspectors; CRN Registered.
*Without insulation
The hydraulic separator creates a zone with a low pressure loss, which
enables the primary and secondary circuits connected to it to be hydraulically
independent of each other; the flow in one circuit does not interfere with flow
in the other.
,aximTm reBommended loV raSes in &P, and UolTme BapaBiSX in
gallons Eor 548 and 5495 series separaSors.
Size 1" 1¼" 1½" 2"
GPM 11 18 26 37
Gallons 0.5 0.7 1.3 3.5
FLOW RATE—UNION CONNECTIONS
Size 2" 2½" 3" 4" 5" 6" 8" 10" 12"
GPM 60 80 124 247 300 484 792 1330 1850
Gallons 4.0 4.0 8.0 8.0 22.5 23 95 175 255
FLOW RATE—FLAN&ED CONNECTIONS
Hydraulic separator.
Epoxy resin coated steel body.
Without insulation.
Complete with:
automatic air vent (code 501502A).
shut-off valve (code NA39589).
drain valve (code NA59600).
ANSI 150 flange connections.
Thermometer pockets (NPT):
½" inlet/outlet flanges, ¾" front center
Max. working pressure: 150 psi.
Working temperature range: 32—270°F.
ASME U-stamp tagged and registered with
the National Board of Boiler and Pressure
Vessel Inspectors; CRN Registered.
Baffle plates for all sizes: 304SST
548
Hydro Separator
ASME/CRN
tech. broch. 01076
Code Description Lbs USD
NA548200A 8" ANSI flange ASME & CRN 520 17,850.00
NA548250A 10" ANSI flange ASME & CRN 725 25,200.00
NA548300A 12" ANSI flange ASME & CRN 1,100 30,500.00
Larger sizes available, consult with factory.
HYDRAULIC SEPARATORS