Product Overview
2
21
MA&NETIC DIRT SEPARATORS
Non-magnetic and magnetic dirt particles in hydronic systems can
deposit onto heat exchanger surfaces and accumulate in pump cavities
causing reduced thermal effi ciency and premature wear. The small and
often microscopic magnetic particles, called magnetite, form when iron or
steel corrodes. Highly abrasive, the extremely fi ne particles are diffi cult to
remove by traditional means. DIRTMAG
®
separators offer highly effi cient
separation of typical dirt as well as magnetite. The magnetite is captured by
a concentrated magnetic fi eld created by a stack of neodymium rare-earth
magnets positioned inside a brass dry-well which is below the fl ow stream.
Non-magnetic dirt particles are separated by colliding with an internal
element in the fl ow stream and settling to the bottom. The deep collection
chamber keeps the dirt from re-entering the fl ow stream.
To purge the debris, the fl exible
magnetic stack is removed from
the brass dry-well and, even while
the system is still running, the
drain valve is opened. Aided by
the system pressure, the dirt and
magnetite fl ushes out quickly and
effectively. DIRTMAG
®
magnetic
dirt separators accomplish 2½
times the magnetite removal
performance of standard dirt
separators, delivering up to 95%
elimination effi ciency.
tech. broch. 01137
NA5465
Dirt magnetic separator.
Epoxy resin coated steel body.
Complete with drain valve (code NA39753).
ANSI 150 fl ange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—270°F.
ASME Registered.
Particle separation capacity: to 5 μm (0.2 mil).
Magnetite removal effi ciency: 95%
Code Description Lbs USD
NA546550AM 2" ANSI fl ange ASME 41 3,617.00
NA546560AM 2½" ANSI fl ange ASME 41 3,849.00
NA546580AM 3" ANSI fl ange ASME 58 5,011.00
NA546510AM 4" ANSI fl ange ASME 58 5,484.00
NA546512AM 5" ANSI fl ange ASME 141 7,906.00
NA546515AM 6" ANSI fl ange ASME 151 10,142.00
2
nd
QT 2
015
2
nd
QT 2015
tech. broch. 01137
5465
Dirt magnetic separator.
Epoxy resin coated steel body.
Complete with drain valve (code NA39753).
ANSI 150 fl ange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—270°F.
Particle separation capacity: to 5 μm (0.2 mil).
Magnetite removal effi ciency: 95%
Code Description Lbs USD
546550AM 2" ANSI fl ange 41 2,430.00
546560AM 2½" ANSI fl ange 41 2,614.00
546580AM 3" ANSI fl ange 58 3,535.00
546510AM 4" ANSI fl ange 58 3,910.00
2
nd
QT 2
015
2
nd
QT 2015