Installation Manual

Applications not using the H hydraulic separator



With systems designed to have the mixing manifold pump also act as the

primary system pump it will require removing the H shaped hydraulic

separator.

 Remove the separator and raise the valves to top union connections.



This application will not require a pump in place pumping to the manifold.

• With systems designed to have the mixing manifold pump also act as the primary system pump

it will require removing the H shaped hydraulic separator.

• Remove the separator and separator and connect the supply/return valves directly to the mixing

valve. Be sure to remove the check valve retainer from the return valve (sometimes it sticks) or it

will not connect to the mixing valve.

• This application will not require a pump between the buffer tank and the manifold mixing station.

Applications not using the H hydraulic separator