Brochure
81
10
A
81
BOILER TRIM KITS
81
SOLAR COLLECTORS
Brass collector union for multiple collector
header installations. Excellent dry high
temperature sealing with silicone O-ring
pre-installed inside union.
2 inch four slot rail has four
9
/
16
" slots which
accept standard stainless steel
3
/
8
" bolt
and nut for mounting collector clips and U
mounts to fl ashing. Aluminum 6005-T5 2
inch four slot rail can span 7 ft. in moderate
wind and snow loads applications.
Code Description Pk Lbs USD
NAS10023 2 inch four slot rail splice bar 1 0.2 15.00
Code Description Pk Lbs USD
NA10272 1" female thread union 1 0.5 50.00
Brass collector union cap for both standard
and drainback installation. Use NA10302
silicone union gasket.
Code Description Pk Lbs USD
586600 1" female thread cap 1 0.2 12.80
Code Description Pk Lbs USD
NAS10410A StarMax™ 4’ x 10’, 4 connection 1 153 2,900.00
NA10126 Crating for NAS10410A (1—6 collectors) MDS 100.00
StarMax™ standard four connection harp
fl at plate collector with parallel headers.
Working pressure: 90 psi.
Max. test pressure: 150 psi.
Working temperature: -40—350ºF.
Typical transfer fl ow rate: 0.5—1.2 gpm.
Wind load rating: 180 mph.
Header - riser tubes: copper.
Copper fi n coating: blue selective.
Connection: (4) 1" male union thread.
Welded frame: powdered coated.
Insulation: molded polyurethane Insulation.
SRCC Category C: 40 kBtu/day.
Approvals: SRCC OG-100.
NAS104
Aluminum 6005-T5 square tube extension
for tilting fl at plate collectors. Connects with
tilt mounting U brackets.
Code Description Pk Lbs USD
NAS10002 1" square tube x 6' 1 2 134.00
NAS10005 1" square tube x 12' 1 4 240.00
Code Description Pk Lbs USD
NAS10006 Tilt mounting kit 1 5 220.00
Code Description Pk Lbs USD
NAS10007 Collector clip kit 1 2 36.00
Code Description Pk Lbs USD
NAS10041 Four slot rail 2" U mount 1 0.5 16.00
Code Description Pk Lbs USD
NAS10030 Flashing kit 1 1 75.00
Tilt mounting brackets and hardware allows
tilt mounting of collectors.
Collector clip secures collectors directly to
2 inch four slot rail with (4) stainless steel
Ǫ"-16 x 1" bolts, nuts & washers.
Flashing kit with Ǫ" stud for attaching
U mounts and other brackets using the
supplied Ǫ“ stainless steel nut & washer.
Black painted aluminum 6061 T6 fl ashing
14¾"L x 9½"W x 0.6"H ,galvanized steel
base plate with six mounting holes and
double stud.
Mounts directly on top of NAS10030 roof
fl ashing with Ǫ" standard stainless steel
nut. Attaches into the side slots of 2 inch
four slot rail using NAS10042 stainless steel
Ǫ"-16 x 1" bolts, nuts & washers.
Aluminum splice bars joins 2 inch four slot
rail sections together. Includes stainless
steel Ǫ" bolts & washers. Requires two
bars for each splice.
High temperature silicone fl at 1" gasket for
drainback connections. Use with 586600
cap and sweat tail piece connections.
Code Description Pk Lbs USD
NA10302 1" fl at silicone gasket 1 0.1 3.00
Code Description Pk Lbs USD
NAS10040-1 2 inch four slot rail rail 58" for one collector 1 6 95.70
NAS10040-2 2 inch four slot rail rail 108" for two collector 1 10 178.20
NAS10040-20 2 inch four slot rail rail 240" for cutting 1 22 396.00
Code Description Pk Lbs USD
NAS10032 Steel base plate 1 0.5 28.00
Galvanized steel base plate with Ǫ"-16
center thread and six mounting holes, can
be used under a truss or rafter.
Code Description Pk Lbs USD
NAS10042 Bolt, nut & washer kit 1 0.2 10.00
Two stainless steel Ǫ" -16 x 1" bolts, nuts
& washers, ASTM F593C.
Code Description Pk Lbs USD
NA10271 Red silicone o-ring 1 0.1 4.00
Red silicone o-ring, replacement for
NA10272.