Brochure

2
14
Code Description Pk Lbs USD
NA546995 ¾" sweat 1 4.3 238.00
NA546996 1" sweat 1 4.3 263.00
The vertical DIRTCAL
®
dirt
separator efficiently removes small
dirt particles with significantly less
clogging of the internal mesh
element compared to normal
Y-strainers. Additionally, the large
dirt collection chamber requires
less frequent cleaning, which
can be done by simply opening
the drain cock to discharge the
accumulated dirt particles, even
with the system running. The
special internal shape of the
separator body is designed to
maximize fluid flow rate with low
head loss. Flow direction of the
DIRTCAL
®
dirt separator is bi-
directional; flow in either direction
is permitted.
NA5469
tech. broch. 01137
Dirt separator for vertical pipes.
Brass body.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Dirt separator with magnet.
Brass body.
½" NPT top thread with plug.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Particle separation capacity: to 5 μm (0.2 mil).
tech. broch. 01137
Code Description Pk Lbs USD
546306A 1" NPT female 1 4.2 296.70
546328A 1" sweat 1 4.2 282.60
546307A 1¼" NPT female 1 5.3 433.20
546335A 1¼" sweat 1 4.2 412.60
546308A 1½" NPT female 1 6.2 563.50
546341A 1½" sweat 1 4.9 536.70
546309A 2" NPT female 1 6.2 680.00
546354A 2" sweat 1 5.5 655.30
5463
%TMBSHNM
The versatile DIRTMAG
®
magnetic dirt
separator removes both magnetic and
non-magnetic particles continuously.
In addition to removing sand and rust
impurities with a glass-reinforced nylon
internal element in a low-velocity-zone
chamber, the DIRTMAG
®
features a
powerful removable external magnet
around the body below the flow line
for fast and effective capture of ferrous
particles. The DIRTMAG
®
has the
magnet positioned externally to maintain
low pressure loss, and removes up to
95% of the ferrous oxide particles that
can form in a hydronic system.
The DIRTMAG
®
can be supplied
with optional insulated covers, code
CBN5462xx series purchased
separately, to minimize heat loss.
1DLNUHMFHMRTK@SHNM@MC
CQ@HMHMFHLOTQHSHDR
1. Remove the insulation by taking
off the bottom casing (A) of the
collection chamber first, and if
necessary, the top insulation
casing later (B).
2. Remove the magnetic ring (C)
containing the two magnets, that
during operation attracted the
ferrous particles.
3. Flush out the ferrous and
nonferrous debris by turning the
handle to open the drain valve (D).
4. When finished, replace the
insulation shells.
, &-$3("#(132$/ 1 3.12
Insulation shell fits DIRTCAL
®
5462 and
DIRTMAG
®
5463 series.
Labels included for field installation to
externally identify product use.
Code Description Pk Lbs USD
CBN546205 Fits ¾" & 1" DIRTCAL
®
, DIRTMAG
®
1 0.1 70.00
CBN546207 Fits 1¼" & 1½" DIRTCAL
®
, DIRTMAG
®
1 0.1 75.00
CBN546209 Fits 2" DIRTCAL
®
, DIRTMAG
®
1 0.1 82.00
DIRT SEPARATORS
B
C
A
D