Brochure

03540-15NA
TECHNICAL SPECIFICATIONS
Calef North America, Inc. · 3883 W. Milwaukee Road · Milwaukee, WI 53208
Tel. [phone] · Fax [phone]
sales@calef .com · www.calef .com
© Copyright 2015 Calef North America, Inc.
WE RESERVE THE RIGHT TO CHANGE OUR PRODUCTS AND THEIR RELEVANT
TECHNICAL DATA, CONTAINED IN THIS PUBLICATION, AT ANY TIME AND
WITHOUT PRIOR NOTICE.
The QuickSetter
+
™ manual balancing valve
contains a built-in fl ow meter and sight gauge,
eliminating the need for differential pressure gauges
and reference charts. Circuit balancing is fast, easy
and accurate. Constructed of DZR low-lead brass,
QuickSetter+™ is ideally suited for use in plumbing
applications such as hot water recirculation
systems. The built-in check valve protects against
circuit thermo-siphoning. The outlet temperature
gauge (optional) verifi es the fl uid temperature in
the circuit. The fl ow meter sight gauge is dry (not
exposed to the fl uid) thus eliminating the possibility
of gauge clouding/scaling over time.
REFERENCE DOCUMENTATION: TECHNICAL BROCHURE 1283
QUICKSETTER
+
™
APPLICATION DIAGRAMS
CODE CONNECTIONS
FLOW RATE
(GPM)
CV*
132439AFC
132438AFC
½” sweat with check valve
½” sweat with temp gauge & check valve
½ — 1¾ 1.0
132539AFC
132538AFC
¾” sweat with check valve
¾” sweat with temp gauge & check valve
132639AFC
132638AFC
1” sweat with check valve
1” sweat with temp gauge & check valve
132459AFC
132458AFC
½” sweat with check valve
½” sweat with temp gauge & check valve
2 — 7 6.3
132559AFC
132558AFC
¾” sweat with check valve
¾” sweat with temp gauge & check valve
132659AFC
132658AFC
1” sweat with check valve
1” sweat with temp gauge & check valve
cold
water
supply
recirculation
pump
check
valve
.5 GPM .5 GPM .5 GPM
1.75
1.50
1.25
1.00
.75
.05
3
5
6
4
230°F
3/4”
GPM
150 psi
4
3
2
1
5
To balance domestic hot water recirculation circuits
Balancing made fast, easy, and accurate with QuickSetter+™
Hot water recirculation systems are designed to minimize wait time for hot water to arrive when a fi xture is opened. Systems left unbalanced or improperly
balanced result in wasted water down the drain, a costly and environmentally unfriendly situation - not to mention the undesired annoyance placed on build-
ing occupants. The QuickSetter+™ takes the guess work and labor out of balancing. With the valve's exclusively designed venturi mechanism, the installer
simply pulls the fl ow indicator by-pass pin, adjusts the fl ow to the desired fl ow rate while viewing the built-in sight gauge, and releases the pin. Easy, accurate
balancing in seconds. No instruments or reference graphs are needed.
* Fully open Cv.
CONSTRUCTION
The control mechanism is a stainless
steel ball valve (1), operated by a
control stem (2). The fl ow rate is
manually and properly set by use
of the convenient onboard fl ow
meter (3) housed in a bypass circuit
on the valve body. This circuit is
automatically shut off during normal
operation. The fl ow rate is indicated
by a metal ball (4) sliding inside
a transparent channel (5) with an
integral graduated scale (6).