Submittal Sheet

Apply the insulation and close with the
Velcro (10) already installed (fig. L).
For installations with chilled water, seal
with suitable adhesive (fig. M).
Maintenance
If broken, the knob of the valve can
be replaced.
- Extract from the adjusting knob
assembly the two parts (11) and (12)
that make up the knob.
Fully turn the valve stem (13)
clockwise with a 7 mm hexagonal
spanner and fully turn the Memory
stop indicator (14) clockwise,
without forcing it, using a 2.5 mm
hexagonal spanner (fig. N).
- Prepare the spare knob in control
position 0–0 (15).
Manually insert the knob (16) in the
adjusting knob assembly, until it
automatically locks (fig. O).
Locking/sealing the
setting position (fig. I)
I
Installing Insulation
L
M
N
O
10
11
12
14
13
16
15