Brochure

58
6
A
SCALD PROTECTION THERMOSTATIC MIXING VALVES FOR PLUMBING
5213
Scald Protection
Point-of-Use
Code Description Cv Lbs USD
521333A
3
/
8
" compression union 2 2 146.00
521347A ½" PEX crimp union 2 2 172.00
521348A ½" PEX expansion union 2 2 172.00
521342A ½" NPT male union 2 2 181.00
521349A ½" sweat union 2 2 172.00
521357A ¾" PEX crimp union 2 2 181.00
521358A ¾" PEX expansion union 2 2 181.00
521352A ¾" NPT male union 2 2 188.00
521359A ¾" sweat union 2 2 181.00
521367A 1" PEX crimp union 2 2 215.00
521368A 1" PEX expansion union 2 2 215.00
521362A 1" NPT male union 2 2 223.00
521369A 1" sweat union 2 2 215.00
521301A* Replacement body, no fittings 2 1.5 119.00
COLD
HOT
521201A
521201AP
Application diagram SinkMixer
TM
Adjustable thermostatic mixing valve for
point of use where protected from scalding
caused by hot water with locking set point.
Complete with check valves on both hot
and cold inlets.
Low-lead brass body.
Max. working pressure: 150 psi.
Max. inlet temperature: 185ºF.
Adjustable range: 85—120ºF.
Temperature control: ±3°F.
Min. ow for optimum performance: 0.5 gpm.
Max ow for optimum performance 9 gpm.
Meets requirements of NSF/ANSI 372-2011. Complies with ASSE 1070, CSA B125.3, UPC, IPC, Low Lead Laws and listed by ICC-ES for use in accordance
with the U.S. and Canadian plumbing codes.
*See tting selection table in Section 8.
Thermostatic mixing valve for under sink
and under counter applications where the
user must be protected from the danger of
scalding caused by hot water.
Temperature adjustment range: 95—120ºF.
Cold inlet temperature: Min. 39°F; Max. 85°F.
Hot inlet temperature: Min. 120°F; Max. 195°F.
Maximum operating differential pressure:
Static: 150 psi (10 bar).
Dynamic: 70 psi (5 bar).
Min. operating differential pressure (dynamic):
1.5 psi (0.1 bar).
Min ow for optimum performance 0.35 gpm.
Max ow for optimum performance 2.3 gpm.
Complies with NSF/ANSI/CAN 61.
5212
SinkMixer
TM
4-way
Scald Protection
Point-of-use
Code Description Cv Lbs USD
521201A
3
/
8
" compression 0.52 1 105.00
521201AP
3
/
8
" compression, plug/fittings 0.52 1.1 107.00
FORGED
LOW-LEAD
BRASS
BODY
INLET CHECK
VALVES W/
SCREEN
WALL
MOUNTING
BRACKET
ADJUSTMENT
SCREW
COLD INLETHOT INLET
MIX OUTLET
COLD OUTLET
COLD
INLET
UNION
NUT
TAMPER
PROOF CAP
Construction details SinkMixer
TM
Code Description Lbs USD
NA10741 5-pack plug/nut fitting kit 0.2 15.80
SinkMixer
TM
5-pack plug/nut fitting kit.
The cold outlet port plug is for single-pipe
mixed water only fixtures.
Code Description Lbs USD
F0001270 Replacement check valve/filter kit 0.1 6.30
SinkMixer
TM
Replacement check valve/filter kit.
Includes two checks and two lters.
NEW
NEW
NEW
NEW
NEW
NEW