Brochure

2
25
Code Description Lbs USD
546328AM 1" sweat 4.7 230.00
546306AM 1" FNPT 4.7 242.00
546366AM 1" press 5 263.00
546335AM 1¼" sweat 4.7 335.00
546307AM 1¼" FNPT 5.8 352.00
546367AM 1¼" press 6.1 402.00
546341AM 1½" sweat 5.4 437.00
546308AM 1½" FNPT 6.7 460.00
546368AM 1½" press 7 524.00
546354AM 2" sweat 6 533.00
546309AM 2" FNPT 6.7 553.00
546369AM 2" press 7 639.00
Dirt separator with dual magnets.
Internal magnet in drywell.
External clip-on magnet.
Brass body.
Max. working pressure: 150 psi.
Working temperature range: 32-250°F.
Particle separation capacity: to 5um
(0.2 mil). Ferrous impurities separation
efciency: 100%.
Code Description Lbs USD
NA545305
¾" NPT male union
4.5 180.00
NA545365 ¾" press union 4.5 195.00
NA545395 ¾" sweat union 4.5 179.00
NA545306 1" NPT male union 4.5 208.00
NA545366 1" press union 4.7 234.00
NA545396 1" sweat union 4.5 198.00
NA545355 ¾" NPT female union, isolation valves 5.5 216.00
NA545356 1" NPT female union, isolation valves 5.5 252.00
NA545376 1" press union, isolation valves 5.5 344.00
MAGNETIC DIRT SEPARATORS
Dirt separator with magnet.
Brass mounting housing.
Composite PA66G30 body.
Max. working pressure: 45 psi.
Working temperature range: 32—195°F.
Particle separation capacity: to 5 µm (0.2 mil).
Ferrous impurities separation efciency: 100%.
Drain valve with hose connection.
Top dosing point port.
Dosing capacity: 12 uid oz.
Manual screw air vent.
The special coupling between the locking nut and the mounting base allows
the DIRTMAG
®
dirt separator to be rotated for installation to either vertical or
horizontal pipes, while maintaining the same operating performance.
The dirt separator with magnet combines the
action of the internal element and magnet. The
impurities in the water strike the internal element
and are separated, dropping into the bottom of
the body where they are collected.
Ferrous impurities are also trapped inside the
dirt separator body by two strong magnets
inserted into removable outer ring collar. The
collected impurities are discharged by removing
the external ring magnet and opening the drain
valve. This procedure can be performed while the
system is in operation.
MAXIMUM FLOW RATE
Size ¾" 1"
GPM 10 10
Cv w/ ball valve 9 9
Cv w/o ball valve 12 12
The DIRTMAG
®
PRO series extends the popular Calef dirt separator family
by adding a powerful neodymium magnetic stack inside a drywell inserted
into the top of the body within the ow stream. Additional magnetic ux
increases the speed of magnetite removal from the hydronic uid for
maximum protection.
2
nd
QTR
2
nd
QTR
5463
DIRTMAG
®
PRO
NA5453
DIRTMAG
®