Brochure
2
24
Code Description Lbs USD
546305A
¾" FNPT
4.2 205.00
546328A 1" sweat 4.2 209.00
546306A 1" FNPT 4.2 219.00
546366A 1" press 4.5 238.00
546335A 1¼" sweat 4.2 305.00
546307A 1¼" FNPT 5.3 320.00
546367A 1¼" press 5.6 365.00
546341A 1½" sweat 4.9 397.00
546308A 1½" FNPT 6.2 418.00
546368A 1½" press 6.5 477.00
546354A 2" sweat 5.5 485.00
546309A 2" FNPT 6.2 503.00
546369A 2" press 6.5 582.00
Dirt separator with magnet.
Brass body.
½" NPT top thread with plug.
Max. working pressure: 150 psi.
Working temperature range: 32—250°F.
Particle separation capacity: to 5 µm (0.2 mil).
Ferrous impurities separation efciency: 100%.
The versatile DIRTMAG
®
magnetic dirt separator removes both magnetic and non-
magnetic particles continuously. In addition to removing sand and rust impurities
with a glass-reinforced nylon internal element in a low-velocity zone chamber, the
DIRTMAG
®
features a powerful removable external magnet around the body below
the ow line for fast and effective capture of ferrous particles. The DIRTMAG
®
has
the magnet positioned externally to maintain low pressure loss, and removes up to
100% of the ferrous impurities that can form in a hydronic system.
The DIRTMAG
®
can be tted with optional insulated covers, code CBN5462xx
series purchased separately, to minimize heat loss.
The dirt separating action performed by the DIRTCAL
®
is based on using the
internal element with concentric diamond pattern mesh surfaces instead of a
mechanical lter. The element offers little resistance to the medium ow while
ensuring dirt separation. This occurs due to the particles colliding with the
concentric diamond pattern mesh surfaces and then settling to the bottom,
and not by ltration; which, over time, gets continuously clogged. By contrast,
the DIRTCAL
®
low-velocity zone dirt separator requires a pressure drop 25%
or less than that of a comparable Y-strainer depending on mesh size and
amount of ltered debris. It efciently removes the particles to as small as 5 µm
(0.2 mil) with very low head loss. The dirt collection chamber at the bottom of
the DIRTCAL
®
is at the optimal distance from the inlet and outlet connections
to ensure that the collected dirt particles are not affected by the swirling ow
through the mesh element. The dirt can then be removed through the bottom drain
port even with the system running by opening the drain valve. Low head losses and
performance are maintained over time.
DIRT & MAGNETIC DIRT SEPARATORS
Insulation shell ts DIRTMAG
®
5463 series.
Labels included for eld installation to
externally identify product use.
Code Description Lbs USD
CBN546205
Fits ¾" & 1" DIRTCAL
®
, DIRTMAG
®
0.1 49.70
CBN546207 Fits 1¼" & 1½" DIRTCAL
®
, DIRTMAG
®
0.1 53.30
CBN546209 Fits 2" DIRTCAL
®
, DIRTMAG
®
0.1 58.30
Replacement drain valve ts DIRTCAL
®
5462 series, DIRTMAG
®
5463 series,
DISCALDIRT
®
546 series and
DISCALDIRTMAG
TM
5461 series.
Brass body.
Max. working pressure: 150 psi.
Max. working temperature: 250°F.
Code Description Lbs USD
538402 FD ½" MNPT x ¾" GHT 0.3 13.10
DIRTCAL
®
to DIRTMAG
®
Retrot kit for 3/4" to 2" 5462 brass DIRTCAL.
Code Description Lbs USD
F41661A Retrofit kit 2.0 101.50
VENT
Application diagram
MAXIMUM FLOW RATE
Size ¾" 1" 1¼" 1½" 2"
GPM 6 9 15 24 36
l/s 0.4 0.57 1.0 1.5 2.3
Cv 19 32 56 73 81
5463
DIRTMAG
®