Brochure

2
21
Dirt separator.
Epoxy resin coated steel body.
1" threaded NPT bottom drain connection
Complete with drain valve (code NA39753).
¾" NPT male top thread with brass cap.
ANSI 150 ange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—270°F.
Particle separation capacity: to 5 µm (0.2 mil).
Dirt separator.
Epoxy resin coated steel body.
1" threaded NPT bottom drain connection
Complete with drain valve (code NA39753).
¾" NPT male top thread with brass cap.
ANSI 150 ange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—270°F.
Particle separation capacity: to 5 µm (0.2 mil).
ASME and CRN registered.
DIRT SEPARATORS
MAXIMUM FLOW RATE
Size 2" 2½" 3" 4" 5" 6"
GPM 89 150 227 355 816 904
Cv 88 176 211 328 520 842
Dirt separation comparison
MAGNETITE
SAND
RUST
WELDING
RESIDUE
0.001 0.01 0.1 110
110 100 1000 10000
average diameter of impurities [mm]
average diameter of impurities [μm]
Y-strainers
working range
SAND
RUST
WELDING
RESIDUE
110 100 1000 10000
average diameter of particles [μm]
MAGNETITE
Y-strainers
®
(Working Range)
(Working Range)
The dirt separating action performed by the DIRTCAL
®
is based on using
the internal element with concentric diamond pattern mesh surfaces
instead of a mechanical lter. The element offers little resistance to the
medium ow while ensuring dirt separation. This occurs due to the
particles colliding with the concentric diamond pattern mesh surfaces and
then settling to the bottom, and not by ltration; which, over time, gets
continuously clogged. By contrast, the DIRTCAL
®
low-velocity zone dirt
separator efciently removes the particles to as small as 5 µm (0.2 mil)
with very low head loss. The dirt collection chamber at the bottom of the
DIRTCAL
®
is at the optimal distance from the inlet and outlet connections
to ensure that the collected dirt particles are not affected by the swirling ow
through the mesh element. The dirt can then be removed through the
bottom drain port even with the system running, by opening the drain
valve. Low head losses and performance are maintained over time.
Code Description Lbs USD
546550A 2" ANSI flange 29 1,671.00
546560A 2½" ANSI flange 38 1,778.00
546510A 4" ANSI flange 54 2,489.00
Code Description Lbs USD
NA546550A 2" ANSI flange ASME & CRN 38 2,680.00
NA546560A 2½" ANSI flange ASME & CRN 38 2,849.00
NA546580A 3" ANSI flange ASME & CRN 55 3,709.00
NA546510A 4" ANSI flange ASME & CRN 55 4,060.00
NA546512A 5" ANSI flange ASME & CRN 138 6,118.00
NA546515A 6" ANSI flange ASME & CRN 148 7,849.00
Dirt separator.
Epoxy resin coated steel body.
2" threaded NPT bottom drain connection.
Complete with drain valve (code NA59600).
¾" NPT male top thread with brass cap.
ANSI 150 ange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—270°F.
Particle separation capacity: to 5 µm (0.2 mil).
ASME registered. CRN registered thru 12".
Consult factory for 14".
Code Description Lbs USD
NA546520A 8" ANSI flange ASME & CRN 335 16,046.00
NA546525A 10" ANSI flange ASME & CRN 620 24,737.00
NA546530A 12" ANSI flange ASME & CRN 870 30,637.00
NA546535A 14" ANSI flange ASME 1,000 38,518.00
MAXIMUM FLOW RATE
Size 8" 10" 12" 14"
GPM 1,570 2,450 3,525 4,800
Cv 1,055 1,400 1,755 2,075
ASME U-stamp tagged and registered with the National Board of Boiler
and Pressure Vessel Inspectors CRN registered.
ASME U-stamp tagged and registered with the National Board of Boiler
and Pressure Vessel Inspectors registered. CRN registered, 8" and 10";
consult factory for 12" — 14".
5465
DIRTCAL
®
NA5465
DIRTCAL
®
ASME/CRN
NA5465
DIRTCAL
®
ASME/CRN