Brochure

10
1
4-IN-1 HYDRAULIC SEPARATORS
Combination 1. air, 2. hydraulic and 3. dirt
separation, plus 4. magnetic separation.
Three neodymium magnet assemblies.
Complete with:
automatic air vent (code 501502A).
air vent shut-off valve (code NA39589).
drain valve (code NA59600).
ANSI 150 ange connections.
Thermometer pockets (NPT):
½" inlet/outlet flanges, ¾" front center
Max. working pressure: 150 psi.
Vessel temperature range: 32—270°F.
Particle separation capacity: to 5 µm (0.2 mil).
CRN registered through 12". Consult fac-
tory for 14".
NA549
SEP
4
™
ASME
FLOW RATE - FLANGED CONNECTIONS
Size 2" 2½" 3" 4" 5" 6" 8" 10" 12" 14"
GPM 60 80 124 247 300 484 792 1330 1850 2500
Gallons 4.0 4.0 8.0 8.0 23 23 95 175 255 450
FLOW RATE - UNION CONNECTIONS
Size 1" 1¼" 1½" 2"
GPM 11 18 26 37
Gallons 0.5 0.7 1.3 3.5
Code Description Lbs USD
NA549200AM 8" ANSI flange ASME & CRN 530 24,856.00
NA549250AM 10" ANSI flange ASME & CRN 740 33,677.00
NA549300AM 12" ANSI flange ASME & CRN 1,110 44,318.00
NA549350AM 14" ANSI flange ASME 1,550 52,248.00
Combination 1. air, 2. hydraulic and 3. dirt
separation, plus 4. magnetic separation.
Epoxy resin coated steel body.
HDPE internal coalescing element,
removable for cleaning.
Includes mounting bracket.
Thermowell tap: 1/2" straight female.
Max. working pressure: 150 psi.
Working temperature range: 32—212°F.
5495
SEP
4
™
Combination 1. air, 2. hydraulic, 3. dirt
separation, plus 4. magnetic separation.
Epoxy resin coated steel body.
Stainless steel internal coalescing mesh.
Pre-formed insulation on 2"— 4" sizes.
One neodymium magnet assembly.
Complete with:
automatic air vent (code 501502A).
air vent shut-off valve (code NA39589).
1" drain valve NA39753 (2"— 4" sizes)
1¼" drain valve NA39588 (5" — 6" sizes).
ANSI 150 ange connections.
Max. working pressure: 150 psi.
Vessel temperature range: 32—220°F.
Working temp. w/o insulation: 32—270°F.
Particle separation capacity: to 5 µm (0.2 mil).
NA549
SEP 4
™
*Without insulation
NA prex indicates ASME U-stamp tagged and registered with the National
Board of Boiler and Pressure Vessel Inspectors; CRN registered.
Code Description Lbs USD
NA549052AM 2" ANSI flange ASME & CRN 76
5,898.00
NA549062AM 2½" ANSI flange ASME & CRN 82 6,333.00
NA549082AM 3" ANSI flange ASME & CRN 112 7,838.00
NA549102AM 4" ANSI flange ASME & CRN 120 8,265.00
NA549120AM* 5" ANSI flange ASME & CRN 220 11,905.00
NA549150AM* 6" ANSI flange ASME & CRN 235 14,361.00
Code Description Lbs USD
549552A 2" ANSI flange 76 5,067.00
549562A 2½" ANSI flange 82 5,400.00
549582A 3" ANSI flange 112 6,757.00
549510A 4" ANSI flange 120 7,568.00
Code Description Lbs USD
549596A 1" sweat union 15 801.00
549506A 1" NPT female union 15 833.00
549566A 1" press union 15 876.00
549597A 1¼" sweat union 19 977.00
549507A 1¼" NPT female union 19 1,010.00
549567A 1¼" press union 19 1,110.00
549598A 1½" sweat union 27 1,275.00
549508A 1½" NPT female union 27 1,321.00
549568A 1½" press union 27 1,442.00
549599A 2" sweat union 29 1,463.00
549509A 2" NPT female union 29 1,499.00
549569A 2" press union 29 1,684.00
549506US* 1" no tailpieces 13 683.00
549507US* 1¼" no tailpieces 16 796.00
549508US* 1½" no tailpieces 23 939.00
549509US* 2" no tailpieces 24 1,138.00
In the SEP4™ hydraulic separators
ferrous impurities are captured by a
concentrated magnetic eld created
by a stack of nedimium magnetic
rods, rare-earth magnets positioned
inside a brass dry-well which is below
the ow stream. Non-magnetic dirt
particles are separated by colliding
with an internal element in the ow
stream and settling to the bottom. The
deep collection chamber keeps the
dirt from re-entering the ow stream.
The dirt and ferrous impurities are
ushed out even while the system is
still running, by removing the magnets
and opening the purge valve.
*See Separator ttings in Section 8.