Owner's manual

POCKET REFERENCE GUIDE — 5
Dimensional Measurement Unit Keys
The following keys are used for
entering units of measure, with ease
and accuracy:
i — Inch
Enters or converts to
Inches . Also
used with the / key for entering
fractional Inch values (e.g., 9 i
1 / 2).
Note: Repeated presses after c toggle
between fractional and decimal Inches (e.g.,
9 i 1 / 2 c i converts to 9.5 Inch;
press
i again to return to Inch-Fractions).
ç — Centimeters
Enters or converts to
Centimeters .
c 9 — Millimeters
Enters or converts to
Millimeters .
Entering Linear Dimensions
When entering fractional values for
Inches, identify your entry by using the
i key
. Enter fractions by entering the
numerator (top), pressing / (fraction
bar key) and then the denominator
(bottom). Press N after each
example.
INCH KEYSTROKE
5 Inch 5 i
5-1/2 Inches 5 i 1 / 2
5.5 Inches 5 • 5 i
(Cont’d)