Owner's manual

POCKET REFERENCE GUIDE — 2
0 – 9 and •
Keys used for entering digits.
/ — Fraction Bar
Used to enter fractions. Fractions
may be entered as proper (1/2, 1/3,
1/4, 1/8) or improper (7/6, 9/3).
They will be displayed in 1/8, 1/4,
1/3, or 1/2 increments. You can also
use / to toggle between fractional
and decimal displays.
c
Used to convert between units of
measure or access secondary
functions.
R
Used for recalling entered or stored
values.
Fabric Default Values
These keys are used for storing
values used for proper calculation of
fabric Yardage.
c + — Seam
Stores the Seam width (default: 1/4
Inch). This value is used in the
material functions for proper
material calculations.