Owner's manual

POCKET REFERENCE GUIDE — 13
CALCULATING BLOCK YARDAGE
The following keys are used to calcu-
late the Yardage of material required
for a number of blocks.
B
Enters the Block Width for calculat-
ing Total Block Yardage via the
b key. A second consecutive
press of B also displays the
diagonal of the Block.
If no Block Height is entered, the
entered block is assumed to be
square (e.g., 4 i B stores a
4 x 4 block to calculate Block
values).
c B — Block Height
Enters the Block Height for rectan-
gular-shaped Blocks. This value
does not need to be entered if the
Block is square, as explained
above. Continuous presses of B
displays Block Width, Block Height,
and Block Diagonal.
If you enter a Block Height, this
value remains until you enter a
B value again. You will need to
re-enter a Block Height if you do not
want to use the entered B as
your block Height.