User`s guide

6 — ElectriCalc Pro
[Set] — Second Function
Accesses the secondary functions
shown above the keys when pressed
prior to selection.
[Stor] — Store
Used to store values when pressed just
before a storage register (i.e., M+,
AMPS, VOLTAGE, etc.).
Displays: STOR.
[Rcl] — Recall
Recalls a value stored in a register
(e.g., to recall voltage drop % press
[Rcl] [VD%]). Displays: RCL.
[Set] [ + ] — Pi (π)
Constant = 3.141593
[Set] [–] — Change Sign (+/–)
Toggles the sign of the displayed value
(from positive to negative or from nega-
tive to positive).
[Set] [%] — x
2
Squares the displayed value.
[Set] [ ] — Square Root ( x )
Square root function.
5060-UG-B-Composite 4/4/03 12:37 PM Page 8