SPECIFICATIONS Measuring Range: Wheel Accuracy: 0 10 9,999,999 (Yards, Meters) 29.5% Internal Math Accuracy: Display Capacity: Speed Limit: Auto Shut-Off: Length (Extended): Length (Folded): Wright: Operating Temperature: Storage Temperature: Wheel Size: 12 digits 9,999,999 (7 digits) 12 mph (19 km/h) 8-9 minutes (Back light shuts off after 90 seconds of inactivity) 41 inches (104 cm) 22 inches (56 cm) 41 1bs (1.
BUTTONS On/Clear Tums power On. Used to clear the display. Press and hold for more than one second to turn unit Off. 1 Off Press [Set] [On/Clear] or press and hold [On/Clear] for more than one second to turn the unit Off. Clear All Press [Set] [Start/Stop] to perform a Clear All, which clears all values and resets all settings. Set Used with other keys to access second functions ** Units Changes units of measurement of the displayed value. Linear: fest-inch, inches, decimal feet, yards, meters Area: sq.
MC Press [Sat] [Rel] to clear all values in the Accumulative Memory. 1s Back light Used fo tum displays back light On and Off. To =N\J= save battery power, the light automatically shuts off after 90 TY seconds of non-use. Length Stores an active measurement as Length. Circle Press [Set] [Length] to access Circle calculations, starting with Circle Area. If accessed while an active measurement is displayed, the measurement is stored as Length (Diameter) before immediately displaying Circle Area.
ACCUMULATIVE MEMORY (MW) Linear, area and volume values can be added and subtracted at any time. Each type Is separately maintained, allowing each to have a running total, average and total count. Memory Recall Press [Rel] [M+] fo display the total of the first unit type. The next two presses of [M+] display the total’s average and total count, respectively. Continue to press [M+] to display the total, average and foal count of any other stored unit types.
Volume, Wall Surface Area (LxWxH) 1. Press [On/Clear] 2. Enter Height mode via [Set] [+1/2 Wheel] 3. Roll Height distance, press [Set] [On/Clear] 4. Roll Length distance, press [Length] [Chronicler] 5. Roll Width distance, press [Sef] [Widths] (Volume) 6. Press [Widths] (Wall Surface Ares} Circle Area, Circumference 1. Press [On/Clear] 2. Roll Diameter distance, press [Set] [Length] (Circle Area) 3. Press [Length] (Circumference) Circle Volume, Wall Surface Area 1. Press [On/Clear] 2.
CARING FOR YOUR Rollerblading Pius 111 If operating in wet weather conditions, cover the head with a clear, light-weight plastic bag. You will be able to see the LCD and operate the keypad. Keep in a dry area when transporting or storing. Do not exceed recommended operating temperature for extended periods. Do not exceed speed of 12 mph (19 km/h). Do not stack any objects on your Dict Roller PLUS Il. ERROR CODES, AUTO-RANGE, RESET li Error Type FOOL Overflow — Measurement too large to display.